Model NO.: OL
Standard: Standard, Nonstandard
Color: Black,Brown,and So on
Working Medium: Hydraulic Oil, Water and Dust
Suitable Temperature: -50°c -120°c
Shore Hardness: 30-100
Trademark: Sxon
Transport Package: Carton or as Your Required
Specification: All size
Origin: China
HS Code: 4016931000
Model NO.: OL
Standard: Standard, Nonstandard
Color: Black,Brown,and So on
Working Medium: Hydraulic Oil, Water and Dust
Suitable Temperature: -50°c -120°c
Shore Hardness: 30-100
Trademark: Sxon
Transport Package: Carton or as Your Required
Specification: All size
Origin: China
HS Code: 4016931000
Product details:
| Item name: | Oil Seal | ||
| Meterial: | NBR, FKM, HNBR , Viton,Silicon ,Q, EPDM, ACM, etc | ||
| Application: | Engine, Transmission, Rear Axle | ||
| Speed: | Speed Mechanical Seal | ||
| lip: | Double lips and single lip are available | ||
| Shape: | O Type | ||
| Color: | Black, brown or as you required | ||
| Pressure: | Pressure type | ||
| Working Medium: | Â Hydraulic Oil, Water and Dust | ||
| Payment terms: | L/C or T/T or Western Union | ||
| Trademark: | ODM, OEM | ||
| Performance: | High temperature resistance,Good oil resistance | ||
| Standard: | Nonstandard / Standard | ||
| Hardness: | 30-100 | ||
| Transport package: | Carton or as Your Required | ||
| Factory visit: | Available | ||
| Company Type | Manufacturer/Factory & Trading Company | ||
| Origin: | China(mainland) | ||
| Hscode: | 4016931000 | ||
| Supply | 500000 per/month | ||
Oil seal is also known as rotary shaft seal. They are often called grease, fluid or dirt seals. An oil seal normally consists of three basic components: The Sealing Element (the nitrile rubber part), the Metal Case, and the Spring. It is a widely used sealing component.Â
Temperature: -50°C -120°C Depending On Rubber Material
Pressure: Up to 0.03 MPa
Reciprocation Speed:Â 0-20m/S
Medias: mineral oils, water, lubricating grease
Specification:Â 6-13000mm
Hardness: 30-100
Related Products:
Testing Equipments
1,Hardness testing: hardness testing of various materials to ensure product hardness to meet customer requirements.
2,Tensile machine: according to the material property requirements test tensile force, according to the standard through the test.
3,Microscopic examination: sampling rate of 20%, oil seal surface is fine cracks, there is scrap, no pass; if the sampling failure rate of 3% and above, the whole batch of full inspection, to ensure quality.
4,Aging box: aging of the material, the temperature of 200 degrees and above, aging phenomenon, then scrapped.
5,Vulcanizing apparatus: test the quality of the glue material, the value is within the standard range, and then pass the test according to the standard.
Certification
We have passed ROHS , ISO9001:2008 quality system certification.
Â
| Packing&Shipping:Â Â Â | Â |
| Size | Official size |
| Packing | A roll of 10, a bundle of 100, and finally put into the packing box |
| About the packing details for sizes, also according to your requirements. | |
| Delivery Time:Â | 5-7 days after payment |
| Payment Terms: | 100%TT advance payment for LC order |
| Normally, the goods will be shipping by Sea, by air or by air express according to customer's request. | |
Company profile
With 34 years experience in producing rubber oil seals, Jiang Yin (No. 3) Rubber Manufacturer Co., Ltd. is a professional manufacturer and industry leader in the researching, manufacturing and selling types of designing, manufacturing and selling types of skeleton oil seals, O rings, Rubber gaskets, Pump valve oil seals and Oil seal cover. Our products can be made into flame retardant, oil resistant, acid and alkali resistance, pressure resistance, tear resistance, yielding high temperature according to different raw materials (250 DEG C) and low temperature (-40 DEG C) rotating type, reciprocating dynamic seal and static seal, according to your actual needs.
Â
FAQQ: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally 3-7 days for standard sealing products; and 15-20 days for big order and custom non-standard products.
Q: Do you provide free samples?
A: Yes, we offer free sample while customer need pay for the freight charge.
Q: Which Payment way is workable?
A: Irrevocable L/C, Cash, PayPal, Credit card and T/T money transfers.
B: 30% T/T deposit in advance, 70% balance before shipment after presentation of ready cargo.
C: L/C ( Irrevocable LC at sight: Order amount over USD10,000)
Q: What is your standard packing?
A: All the goods will be packed by carton box and loaded with pallets. Special packing method can be accepted when needed.
Q: How to select the raw compound for my application?
A: With years of experience working with a variety of material, we can help select the material that will best suit your needs while keeping material costs in mind.
Q: Do you use any international standards for the rubber products?
A: Yes, we mainly use ASTM D2000 standard to define the quality of the rubber materials, tolerances as per ISO3302, ISO2768, etc.
Q: Can you supply different color materials?
A: Yes, we can produce custom molded rubber and silicone rubber products in different colors, the color code will be required in case of an order.
Q: What materials are available to produce from your side?
A: NBR, EPDM, SILICONE, VITON(FKM), NEOPRENE(CR), NR, IIR, SBR, ACM, AEM, Fluorosilicone(FVMQ), FFKM, Liquid Silicone, Sponge, etc.
Â
Â
Product details:
| Item name: | Oil Seal | ||
| Meterial: | NBR, FKM, HNBR , Viton,Silicon ,Q, EPDM, ACM, etc | ||
| Application: | Engine, Transmission, Rear Axle | ||
| Speed: | Speed Mechanical Seal | ||
| lip: | Double lips and single lip are available | ||
| Shape: | O Type | ||
| Color: | Black, brown or as you required | ||
| Pressure: | Pressure type | ||
| Working Medium: | Â Hydraulic Oil, Water and Dust | ||
| Payment terms: | L/C or T/T or Western Union | ||
| Trademark: | ODM, OEM | ||
| Performance: | High temperature resistance,Good oil resistance | ||
| Standard: | Nonstandard / Standard | ||
| Hardness: | 30-100 | ||
| Transport package: | Carton or as Your Required | ||
| Factory visit: | Available | ||
| Company Type | Manufacturer/Factory & Trading Company | ||
| Origin: | China(mainland) | ||
| Hscode: | 4016931000 | ||
| Supply | 500000 per/month | ||
Oil seal is also known as rotary shaft seal. They are often called grease, fluid or dirt seals. An oil seal normally consists of three basic components: The Sealing Element (the nitrile rubber part), the Metal Case, and the Spring. It is a widely used sealing component.Â
Temperature: -50°C -120°C Depending On Rubber Material
Pressure: Up to 0.03 MPa
Reciprocation Speed:Â 0-20m/S
Medias: mineral oils, water, lubricating grease
Specification:Â 6-13000mm
Hardness: 30-100
Related Products:
Testing Equipments
1,Hardness testing: hardness testing of various materials to ensure product hardness to meet customer requirements.
2,Tensile machine: according to the material property requirements test tensile force, according to the standard through the test.
3,Microscopic examination: sampling rate of 20%, oil seal surface is fine cracks, there is scrap, no pass; if the sampling failure rate of 3% and above, the whole batch of full inspection, to ensure quality.
4,Aging box: aging of the material, the temperature of 200 degrees and above, aging phenomenon, then scrapped.
5,Vulcanizing apparatus: test the quality of the glue material, the value is within the standard range, and then pass the test according to the standard.
Certification
We have passed ROHS , ISO9001:2008 quality system certification.
Â
| Packing&Shipping:Â Â Â | Â |
| Size | Official size |
| Packing | A roll of 10, a bundle of 100, and finally put into the packing box |
| About the packing details for sizes, also according to your requirements. | |
| Delivery Time:Â | 5-7 days after payment |
| Payment Terms: | 100%TT advance payment for LC order |
| Normally, the goods will be shipping by Sea, by air or by air express according to customer's request. | |
Company profile
With 34 years experience in producing rubber oil seals, Jiang Yin (No. 3) Rubber Manufacturer Co., Ltd. is a professional manufacturer and industry leader in the researching, manufacturing and selling types of designing, manufacturing and selling types of skeleton oil seals, O rings, Rubber gaskets, Pump valve oil seals and Oil seal cover. Our products can be made into flame retardant, oil resistant, acid and alkali resistance, pressure resistance, tear resistance, yielding high temperature according to different raw materials (250 DEG C) and low temperature (-40 DEG C) rotating type, reciprocating dynamic seal and static seal, according to your actual needs.
Â
FAQQ: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally 3-7 days for standard sealing products; and 15-20 days for big order and custom non-standard products.
Q: Do you provide free samples?
A: Yes, we offer free sample while customer need pay for the freight charge.
Q: Which Payment way is workable?
A: Irrevocable L/C, Cash, PayPal, Credit card and T/T money transfers.
B: 30% T/T deposit in advance, 70% balance before shipment after presentation of ready cargo.
C: L/C ( Irrevocable LC at sight: Order amount over USD10,000)
Q: What is your standard packing?
A: All the goods will be packed by carton box and loaded with pallets. Special packing method can be accepted when needed.
Q: How to select the raw compound for my application?
A: With years of experience working with a variety of material, we can help select the material that will best suit your needs while keeping material costs in mind.
Q: Do you use any international standards for the rubber products?
A: Yes, we mainly use ASTM D2000 standard to define the quality of the rubber materials, tolerances as per ISO3302, ISO2768, etc.
Q: Can you supply different color materials?
A: Yes, we can produce custom molded rubber and silicone rubber products in different colors, the color code will be required in case of an order.
Q: What materials are available to produce from your side?
A: NBR, EPDM, SILICONE, VITON(FKM), NEOPRENE(CR), NR, IIR, SBR, ACM, AEM, Fluorosilicone(FVMQ), FFKM, Liquid Silicone, Sponge, etc.
Â
Â
Cable Roller Reel,Cable Machine,Cable Bobbin,Steel Cable Spools
RBO Machinery & Electric (Suzhou) Co., Ltd. , http://www.wire-drawingmachine.com