Product Description
A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a screw or nut. Other uses are as a spacer, spring (belleville washer, wave washer), wear pad, preload indicating device, locking device, and to reduce vibration (rubber washer). Washers usually have an outer diameter (OD) about twice the width of their inner diameter (ID).
 
Mainly Product;
BOLT : din933, din931, din419, din558, din7990, din6922, ASME/ANSI B 18.2.1 , ASME/ANSI B         18.2.3.1M,GB, BSW, ISO Hex bolt , carriage bolt, heavy hex bolt, flange head bolt, achor bolt ect
Rod : threaded rod din976, threaded bar din975 stud bolt, B7 stud bolt ect
Nut  : din934, hex heavy hex nut, 2H nut, din555, flange bolt, cap nut, nylon nut, ect
Screw  :hex screw, self drilling screw, self tapping screw, drywall screw, pan head screw, button head screw, machine screw, chipboard screw,furniture screw,wood screw, ect
 washer  :flat washer, spring washer, lock washer,square washer,spring lock washer, plain washer ect

Customized:
If you have drawing or samples, we can as your requirment to product. Welcome to your early reply.

Promise:
1. Hight quality
2. Competitive price
3. The shortest delivery
4. The fastest response
5.  Best service  Product Description
A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a screw or nut. Other uses are as a spacer, spring (belleville washer, wave washer), wear pad, preload indicating device, locking device, and to reduce vibration (rubber washer). Washers usually have an outer diameter (OD) about twice the width of their inner diameter (ID).
 
Mainly Product;
BOLT : din933, din931, din419, din558, din7990, din6922, ASME/ANSI B 18.2.1 , ASME/ANSI B         18.2.3.1M,GB, BSW, ISO Hex bolt , carriage bolt, heavy hex bolt, flange head bolt, achor bolt ect
Rod : threaded rod din976, threaded bar din975 stud bolt, B7 stud bolt ect
Nut  : din934, hex heavy hex nut, 2H nut, din555, flange bolt, cap nut, nylon nut, ect
Screw  :hex screw, self drilling screw, self tapping screw, drywall screw, pan head screw, button head screw, machine screw, chipboard screw,furniture screw,wood screw, ect
 washer  :flat washer, spring washer, lock washer,square washer,spring lock washer, plain washer ect

Customized:
If you have drawing or samples, we can as your requirment to product. Welcome to your early reply.

Promise:
1. Hight quality
2. Competitive price
3. The shortest delivery
4. The fastest response
5.  Best service 

Gas-Phase Ultrasonic Cleaning Machine

The principle of gas-phase cleaning machine is as follow. When the solvent is heated, the steam forms the gas phase zone. In this area, the oil on the surface of the workpiece is dissolved and washed by steam. When the steam condenses, the dirt along with the grease falls back into the tank to become the cleaning fluid. Then, the cleaning fluid is heated and gasified into steam to clean the workpiece. This continuous cycle ensures the workpiece is always surrounded by the steam of cleaning fluid which overcomes the problem of contaminated cleaning fluid in the past common cleaning process.

Heat Exchanger Cleaning Agent/Metal Decreasing Agent

Trichloro ethylene, tetrachloro ethylene, dichloromethane,  isopropyl alcohol have very good cleaning effect with high stability, long usage period when they are used as metal cleaning agent. In Heat Exchanger factories, these degreasing agents are widely applied in cleaning fins, bars, parting plates, tanks and other Heat Exchanger Parts . After these heat exchanger parts with oil stain are soaked in the cleaning agent and cleaned by supersonic, they`ll be very clean which also ensure heat exchanger with good brazing quality.

Heat Exchanger Cleaning

Heat Exchanger Cleaning,Heat Exchanger Tube Cleaning,Ultrasonic Automatic Cleaning Machine,Cleaning Of Tube Heat Exchangers

Wuxi Better Technology Co., Ltd , http://www.btheatexchanger.com