Manufacturers supply 2 tons of kcal for 2 tons of gas-fired thermal oil furnace

The heating surface of the gas-fired oil-conducting oil boiler body has a compact structure, and the heating surface is composed of inner and outer densely packed disks. The inner coil tube is a radiant heating surface, and the outer and outer surfaces of the outer coil tube and the inner coil tube constitute a convection heating surface. The gas-fired thermal oil boiler boiler consists of an upper body and a lower incinerator and is assembled on site. After the incinerator is fully burned in the incinerator, most of the heat is absorbed by the radiation heating surface. The high-temperature flue gas enters the convection and heating surface for heat exchange. After exiting the boiler, the air required for boiler incineration is heated in the air preheater, and then passes through the dust collector. The induced draft fan sends the flue gas to the chimney for discharge into the atmosphere.
I. Operation principle and application of gas-fired thermal oil boiler 1. Principle of gas-fired thermal oil boiler: It uses heavy oil, light oil or flammable liquid as fuel. The thermal oil is the heat carrier. The circulating oil pump is used to forcibly circulate the liquid phase. The heat energy is used for transport. After heating the equipment, it was followed by a special type of direct-heat industrial furnace that was heated from scratch.
2. Usage of gas-fired heat-conducting oil boilers: Widely used in such industries as petrochemicals, textiles, printing and dyeing, plastics, rubber, food processing, wood processing, asphalt heating, carton production, vegetable dehydration, baking paint, sand mold drying, etc. 350oC baking, steaming, shaping, melting and drying.
Second, the characteristics of gas-fired thermal oil boiler 1, high-efficiency horizontal three-way structure, the flame volume of the burner and the balance of heat exchange surface product so that the flue gas outlet flue gas exhaust pipe reaches the best temperature, thick insulation layer so that the boiler cooling Reach the minimum.
2. The safety-enhanced boiler heat-resistant steel pipe ensures the safety of the boiler. Active burn-in procedures, active incineration control, active flame monitoring and alarm, over-temperature and over-pressure control and alarm make the boiler more safe.
3, the use of long-lived and reasonable boiler structure, thermal oil flow rate and flow rate of the overall consistency, to ensure that the furnace tube will not burst due to carbon deposition, both to ensure the safety of the boiler, together also extend the life of the oil.
4, a furnace temperature based on user requests, a boiler can output two or more different temperature of the heat transfer oil.

Grinding Belt

Imported High Speed Metal Alloy Grinding Wheel

Characteristic:
1. can be used for water throwing and dry throwing;
2. rubber belt polishing and roll core dehairing belt;
3. there are multiple types, size and style

Jinan Power Rubber Roller Equipment Co., Ltd is a modern private enterprise embodying scientific research and production. It was set up in 1998, and now is the main base in our country for manufacturing rubber roller special machine.



Equipment Accessories

Grinding Belt, Grinding Wheel, Metal Alloy Grinding Wheel, High Speed Grinding Wheel

Jinan Power Rubber Roller Equipment Co., Ltd. , https://www.powerrubberroller.com