The national six post-processing system adopts DOC+DPF+SCR+ASC technology, adopts double NOx sensor, 4 temperature sensor and 1 differential pressure sensor. A non-air assisted urea injection system is employed. The schematic diagram of the post-processing structure of the country is as follows:
Guoliu's post-processing system adopts DOC+DPF+SCR+ASC technology
DOC: Diesel Oxidation Catalyst Diesel Oxidation Catalyst
DPF: Diesel Particulate Filter Diesel Particulate Filter
SCR: Selective Catalytic Reduction
ASC: Ammonia Slip Catalyst Ammonia Purification Catalyst
1. Box type catalytic muffler (for K15/K13/11)
Box catalytic muffler
Dimensions: 710mm × 622mm × 625mm
2. Box-type integrated muffler (structure is applicable to K09/08/K05/S06)
Box integrated muffler
Dimensions: 650mm × 550mm × 625mm
3. One-word drum type integrated muffler (K08\K05\S06\S04\Y30\Y24)
One-word drum integrated muffler
Dimensions: φ260mm × 1070mm\φ 258mm × 1005mm\φ 220mm × 950mm
4. U-shaped integrated muffler (K09\K08\K05\S06\S04)
U-shaped integrated muffler
Suitable for rear passenger cars, the size varies according to the model
5, S-type integrated muffler (K09\K08\K05\S06\S04)
S type integrated muffler
Suitable for rear passenger cars, the size varies according to the model
6, the gas engine country after the six processing overall plan:
The gas engine aftertreatment system uses EGR+TWC technology. The schematic diagram of the post-processing structure of the country is as follows:
Gas engine country six post-processing overall plan
The knowledge points about the post-processing system of the National Sixth are counted here. If you want to get more information about the National Six Engine Aftertreatment System, please pay attention to the follow-up report of China Truck Network.
Reading volume: Source: Yuchai United Power Author: Cold autumnA lifting hook is a device for grabbing and lifting loads by means of a device such as a hoist or crane. A lifting hook is usually equipped with a safety latch to prevent the disengagement of the lifting wire rope sling, chain or rope to which the load is attached.
1. Our History:
LITE Crane Co., LTD has focused on top quality Crane Parts for over 14 years in China. We started as a small operation, but now have become one of the leading suppliers in the crane industry in China.
Today, LITE Crane Co., LTD has been one of the top producers of quality crane and crane parts, such as: Electric Hoist, single, double girder bridge, gantry, grab, casting, explosion-proof crane series and accessories.
2. Our Factory:
LITE Crane Co., LTD is located in Xinxiang, Henan Province China. The company covers an area of 680 thousand square meters and owns more than 2700 employees. The annual sales of LITE Crane Co., LTD is 1.6 billion USD, there are more than 600 sales agencies at home and abroad and more than 180 middle& senior engineering and technical personnel who are in charge of design and development of all products and also own the development center of their new technology and products.
3.Our Product:
Our Products includes the following:
1, Crane accessories
2, Electric hoist
3, Single - beam cranes
4, Double - beam cranes
5, Bridge Crane
6, Gantry Crane
7.Lifting equipment and accessories
We supply crane products all over the globe to a wide range of companies worldwide.
4.Product Application:
The products are widely used in the following industry, such as power plants, nuclear power, water conservancy, tunnels, bridges, petrochemical, metallurgy, construction, open-air warehouse, wharf, workshop ...
5.Our Certificate:
Our company is a member of China Crane Association and vice chairman company of China Heavy Machinery Association. It owns the production licenses of electric hoist, single & double-girder crane, the safety of the approval certificate of manufacturing, installation and maintenance, the safety approval certificate of the manufacturing of 320T bridge crane, portal crane and 280Tcasting crane.
The company has passed the quality system certification of GB/T19001 -2008/IS09001:2008, the environmental management system certification of GB/T24001-2004/ISO14001:2004 and the occupational health and safety management system certification GB/T28001-2001.
6.Production Equipment:
There are 1600 units of all kinds of processing equipment which can independently accomplish all the processes such as milling, digging, grinding, pulling, boring, rolling, drilling, punching, cutting, bending, welding, testing and heat treatment.
7.Production Market:
Our products are sold to more than 30 provinces, municipalities and autonomous regions in China, and also exported to Australia, Vietnam, India, Thailand and some Southeast Asian countries. The annual sales of double-girder and portal cranes is more than 3600 units, more than 23000 units single-girder cranes, about 23000 units single-girder & double-girder electric hoist and accessories. The production and sales of the single-girder cranes has lead the nation for seven consecutive years and the per capita output and economic benefits are among the best in the same industry.
8.Our service:
Besides our existing molded products, LITECrane Co., LTD also can produce products according to the drawings or samples from our customers. We control the product quality critically for every step during the manufacturing from custom.
Hook Group
Crane Hooks Assembly,Safety Crane Hooks,Hook Device In Crane,Forging Single Hook
Shandong Lite Electrical Co.,Ltd , http://www.chinacranegroup.com