Since the launch of the market, microwave dryers have been widely used in the pharmaceutical field due to their convenience, speed, pollution-free and practicality. However, due to the complexity of pharmaceutical varieties and the diversity of pharmaceutical processes, microwave dryers still have many shortcomings in the pharmaceutical field.
At the equipment level, the heat loss of the microwave dryer is more serious, and there are still many shortcomings in the temperature detection. There are also some problems in the circuit control. Specifically, due to insufficient design, there is no adequate insulation and isolation between the various components of the equipment, and about 15% of the heat is absorbed by the outer metal material and then released into the operating space.
In addition, a portion of the heat is released to the job site, causing the temperature in the production environment to rise rapidly. Although the microwave dryer has invested a lot of power, the heat energy obtained is not ideal, and the energy waste is also serious.
In terms of temperature detection, some microwave dryers use the traditional temperature detection sensor, which makes the sensor sensitivity of the whole device low and the data conductivity is poor. Therefore, the limitations of these traditional components will make microwave dryers fail to meet the requirements of modern pharmaceutical processes.
When the microwave dryer has been working for a long time, the high-voltage diode in the circuit will also have a significantly lower high-pressure resistance. Due to the decrease in the high-pressure resistance, the high temperature will greatly increase the equipment failure rate, which seriously affects the product. The output of quality and qualified products will also significantly reduce production efficiency.
At the market level, experts said that the drying equipment currently used in the pharmaceutical industry is generally based on products with lower technical content, and there is still a certain gap compared with developed countries.
With China's emphasis on issues such as drug safety and environmental protection, pharmaceutical companies are more inclined to high-end, efficient equipment to ensure the competitiveness of enterprises. Therefore, in order to break through the pharmaceutical industry, the microwave dryer has to increase research and development efforts to gain the right to speak in the industry.
In addition, microwave dryers are widely used in the pharmaceutical industry because the equipment itself can be both dry and sterilized, so it is widely used in the pharmaceutical industry. However, in the pharmaceutical equipment, another major problem of microwave equipment in the pharmaceutical industry has arisen, lacking the authoritative voice from the industry.
Microwave dryers have to break through the bottleneck in order to gain more and greater opportunities in the market. For example, when microwave dryer companies have the productivity of high-quality products, they can use the Internet as a tool to promote branding, promote products, and enable customers to search for their products more quickly and conveniently on the Internet.
In addition, microwave dryer companies can also see the corporate brand in the professional industry media to improve the conversion rate of brand-oriented communication, which is also one of the necessary strategies. China Pharmaceutical Network is a portal for pharmaceutical machinery equipment industry. It can create a global network marketing service platform for professional users, and build a bridge of information interaction for domestic pharmaceutical machinery and related enterprises to realize business opportunities.
Of course, it is more fundamental that the microwave dryer enterprises should make technical improvements. For example, in terms of thermal energy loss, a layer of thermal insulation device can be installed between the magnetron and the thermal energy emitting head, and each magnetron and equipment gap are also filled with heat-insulating material to make each magnetic The heat generated by the control tube can be directly applied to the material and completely absorbed by the material on the conveyor belt.
When the heat energy has no space to be distributed, the loss is almost zero, the heat energy utilization rate is greatly increased, and the ambient temperature at the work site is also significantly reduced. Therefore, related companies need to improve the technology of microwave dryers to achieve more equipment possibilities, thus more in line with the requirements of modern pharmaceutical processes and GMP, and effectively improve the quality of pharmaceutical products.
At the equipment level, the heat loss of the microwave dryer is more serious, and there are still many shortcomings in the temperature detection. There are also some problems in the circuit control. Specifically, due to insufficient design, there is no adequate insulation and isolation between the various components of the equipment, and about 15% of the heat is absorbed by the outer metal material and then released into the operating space.
In addition, a portion of the heat is released to the job site, causing the temperature in the production environment to rise rapidly. Although the microwave dryer has invested a lot of power, the heat energy obtained is not ideal, and the energy waste is also serious.
In terms of temperature detection, some microwave dryers use the traditional temperature detection sensor, which makes the sensor sensitivity of the whole device low and the data conductivity is poor. Therefore, the limitations of these traditional components will make microwave dryers fail to meet the requirements of modern pharmaceutical processes.
When the microwave dryer has been working for a long time, the high-voltage diode in the circuit will also have a significantly lower high-pressure resistance. Due to the decrease in the high-pressure resistance, the high temperature will greatly increase the equipment failure rate, which seriously affects the product. The output of quality and qualified products will also significantly reduce production efficiency.
At the market level, experts said that the drying equipment currently used in the pharmaceutical industry is generally based on products with lower technical content, and there is still a certain gap compared with developed countries.
With China's emphasis on issues such as drug safety and environmental protection, pharmaceutical companies are more inclined to high-end, efficient equipment to ensure the competitiveness of enterprises. Therefore, in order to break through the pharmaceutical industry, the microwave dryer has to increase research and development efforts to gain the right to speak in the industry.
In addition, microwave dryers are widely used in the pharmaceutical industry because the equipment itself can be both dry and sterilized, so it is widely used in the pharmaceutical industry. However, in the pharmaceutical equipment, another major problem of microwave equipment in the pharmaceutical industry has arisen, lacking the authoritative voice from the industry.
Microwave dryers have to break through the bottleneck in order to gain more and greater opportunities in the market. For example, when microwave dryer companies have the productivity of high-quality products, they can use the Internet as a tool to promote branding, promote products, and enable customers to search for their products more quickly and conveniently on the Internet.
In addition, microwave dryer companies can also see the corporate brand in the professional industry media to improve the conversion rate of brand-oriented communication, which is also one of the necessary strategies. China Pharmaceutical Network is a portal for pharmaceutical machinery equipment industry. It can create a global network marketing service platform for professional users, and build a bridge of information interaction for domestic pharmaceutical machinery and related enterprises to realize business opportunities.
Of course, it is more fundamental that the microwave dryer enterprises should make technical improvements. For example, in terms of thermal energy loss, a layer of thermal insulation device can be installed between the magnetron and the thermal energy emitting head, and each magnetron and equipment gap are also filled with heat-insulating material to make each magnetic The heat generated by the control tube can be directly applied to the material and completely absorbed by the material on the conveyor belt.
When the heat energy has no space to be distributed, the loss is almost zero, the heat energy utilization rate is greatly increased, and the ambient temperature at the work site is also significantly reduced. Therefore, related companies need to improve the technology of microwave dryers to achieve more equipment possibilities, thus more in line with the requirements of modern pharmaceutical processes and GMP, and effectively improve the quality of pharmaceutical products.
Grain Drill is suitable for wheat, barley, millet, sorghum and soybeans et. Seeding quantity, seeding depth and seeding spacing can be adjusted according to the needs of agricultural technology.
The machine adopts linkage and tractor hitch, transportation is convenient.
The machine adopts outside slot round row device, metering, and blocking for powder metallurgy parts, possesses the advantages of heat resistance, cold. Using corrugated rubber grain tube, two smooth; Adopt double bearing steel opener, reliable work. Using the handwheel adjustment sowing depth, easy to use.
Transmission part is composed of rubber wheel, sprocket and chain, reliable durable, can be suitable for high-speed operation.
Grain Drill
Grain Drill,Grain Drill Planter,Grain Drill Seeder,Farm Grain Drill
Shijiazhuang Goldrain I/E Co.,Ltd. , https://www.goldraingroup.com