CZJ-B4-A03-B01-C01 vibration monitoring and protection device
It is a precision relative vibration amplitude measuring instrument. It is equipped with HN800 eddy current sensor to measure and monitor the radial relative vibration or swing of the large shaft or rotor of rotating machinery such as steam turbines and fans. It has alarm and stop control signal output, and has a universal interface for current output, which can be connected with computers, DCS, PLC systems, paperless recorders and other equipment.
The main function is the radial vibration of the shaft of a rotating machine such as a steam turbine, a water turbine, a compressor, a blower, and the monitoring and protection of the swing.
Function Description:
1. Display function vibration, swing measurement value, I value alarm, and II value alarm setting value, which can be displayed on the LED digital tube.
2. Alarm function When the vibration exceeds the alarm set value, the alarm indicator lights, and the switch signal is output on the rear panel to protect the monitored equipment.
3. Alarm delay time setting function The alarm delay time adjustment range is 0~3 seconds to prevent accidental alarm caused by on-site interference.
4. The self-diagnosis function has the function of power-on and power-down detection, and disconnects the alarm output circuit at the same time, which can effectively suppress the false alarm of the meter.
5. The output interface is equipped with a current output interface, which can be connected with computers, DCS, PLC systems, paperless recorders and other equipment.
CZJ-B4-A03-B01-C01 vibration monitoring and protection device
HZD-L vibration intensity monitor is mainly used for long-term monitoring of the vibration intensity of rotating machinery with speed of 600~6000 rpm. It is matched with ST series magneto-electric vibration speed sensor and can monitor the vertical and horizontal vibration of rotating machinery. The vibration intensity value is displayed by the head of the instrument front panel, and has a standard current output. It can be connected with various DCS and PLC systems. When the vibration value exceeds the limit, the instrument can be connected with an external sound and light alarm to prompt the operation. Personnel take precautionary measures and have alarm and dangerous switch output to protect the machine safely and reliably. I. Overview
The HZD-L/W vibration monitor can be connected to a variety of vibration sensors, such as magneto-electric speed sensors or eddy current sensors. When connected to the speed sensor, it can measure the vibration intensity (vibration speed RMS) or displacement (vibration amplitude) in the vertical or horizontal direction of the casing or housing.
When connected to an eddy current sensor, the radial and horizontal radial vibrations of the rotating machine shaft can be measured. The digital display can separately display the vibration values ​​of the two channels. Each channel has an independent alarm, hazardous circuit and relay contact output. Accurately set alarm and hazard values, alarms and dangerous delay times, and view alarm and hazard settings at any time.
The standard voltage (1~5V) or standard current (4~20mA) corresponding to the vibration value can be independently output for use by a computer, data collector, recorder or other automatic control system. Other voltages or currents can also be output as needed. The gain of each channel is automatically adjusted for easy calibration of the system.
All functions are controlled by a single computer, and the parameter settings are all completed by the buttons. The adjustment is convenient, the precision is high, stable and reliable.
CZJ-B4-A2-B2-C2,
I. Overview
The HZD-L/W vibration monitor can be connected to a variety of vibration sensors, such as magneto-electric speed sensors or eddy current sensors. When connected to the speed sensor, it can measure the vibration intensity (vibration speed RMS) or displacement (vibration amplitude) in the vertical or horizontal direction of the casing or housing.
When connected to an eddy current sensor, the radial and horizontal radial vibrations of the rotating machine shaft can be measured. The digital display can separately display the vibration values ​​of the two channels. Each channel has an independent alarm, hazardous circuit and relay contact output. Accurately set alarm and hazard values, alarms and dangerous delay times, and view alarm and hazard settings at any time.
The standard voltage (1~5V) or standard current (4~20mA) corresponding to the vibration value can be independently output for use by a computer, data collector, recorder or other automatic control system. Other voltages or currents can also be output as needed. The gain of each channel is automatically adjusted for easy calibration of the system.
All functions are controlled by a single computer, and the parameter settings are all completed by the buttons. The adjustment is convenient, the precision is high, stable and reliable.
It can measure the vibration of the casing or structure relative to the free space, that is, the absolute vibration. It is especially suitable for machines with ball bearings. In this machine, the vibration of the shaft can be transmitted to the casing more, so the monitor can be equipped with Connect the magnetic speed sensor to continuously measure and protect the rotating machine. The sensor should be installed with special care, without causing the sensor amplitude to be reduced, and the frequency influence is changed or the generated signal can not represent the real vibration of the machine. For the motor, Compressors, fans, etc. need to measure a large number of vibration points, and the monitor is especially suitable.
The main function realizes intelligent processing: alarm I value, II value can be adjusted by panel button to adjust the range value, no potentiometer adjustment, convenient on-site debugging
30 seconds without pressing the operation button, you can return to the running state. The rear panel has a current output terminal proportional to the vibration amplitude value. The recording output has an alarm delay function (any setting is 0~25.5 seconds).
Instrument
Measuring range: 0 to 10 mm/s, 0 to 20 mm/s (LD)
0 to 100 μm, 0 to 200 μm (ZD)
Frequency response: 10 ~ 1000Hz (in accordance with ISO2954 standard)
Display accuracy: 1%
Output accuracy: 1%
Output form: 4 ~ 20mA (two ways: vertical, horizontal)
Dimensions: 160 × 80 × 250 (mm)
Opening size: 150 × 75 (mm)
It is a precision relative vibration amplitude measuring instrument. It is equipped with HN800 eddy current sensor to measure and monitor the radial relative vibration or swing of the large shaft or rotor of rotating machinery such as steam turbines and fans. It has alarm and stop control signal output, and has a universal interface for current output, which can be connected with computers, DCS, PLC systems, paperless recorders and other equipment.
The main function is the radial vibration of the shaft of a rotating machine such as a steam turbine, a water turbine, a compressor, a blower, and the monitoring and protection of the swing.
Function Description:
1. Display function vibration, swing measurement value, I value alarm, and II value alarm setting value, which can be displayed on the LED digital tube.
2. Alarm function When the vibration exceeds the alarm set value, the alarm indicator lights, and the switch signal is output on the rear panel to protect the monitored equipment.
3. Alarm delay time setting function The alarm delay time adjustment range is 0~3 seconds to prevent accidental alarm caused by on-site interference.
4. The self-diagnosis function has the function of power-on and power-down detection, and disconnects the alarm output circuit at the same time, which can effectively suppress the false alarm of the meter.
5. The output interface is equipped with a current output interface, which can be connected with computers, DCS, PLC systems, paperless recorders and other equipment.
CZJ-B4-A03-B01-C01 vibration monitoring and protection device
HZD-L vibration intensity monitor is mainly used for long-term monitoring of the vibration intensity of rotating machinery with speed of 600~6000 rpm. It is matched with ST series magneto-electric vibration speed sensor and can monitor the vertical and horizontal vibration of rotating machinery. The vibration intensity value is displayed by the head of the instrument front panel, and has a standard current output. It can be connected with various DCS and PLC systems. When the vibration value exceeds the limit, the instrument can be connected with an external sound and light alarm to prompt the operation. Personnel take precautionary measures and have alarm and dangerous switch output to protect the machine safely and reliably. I. Overview
The HZD-L/W vibration monitor can be connected to a variety of vibration sensors, such as magneto-electric speed sensors or eddy current sensors. When connected to the speed sensor, it can measure the vibration intensity (vibration speed RMS) or displacement (vibration amplitude) in the vertical or horizontal direction of the casing or housing.
When connected to an eddy current sensor, the radial and horizontal radial vibrations of the rotating machine shaft can be measured. The digital display can separately display the vibration values ​​of the two channels. Each channel has an independent alarm, hazardous circuit and relay contact output. Accurately set alarm and hazard values, alarms and dangerous delay times, and view alarm and hazard settings at any time.
The standard voltage (1~5V) or standard current (4~20mA) corresponding to the vibration value can be independently output for use by a computer, data collector, recorder or other automatic control system. Other voltages or currents can also be output as needed. The gain of each channel is automatically adjusted for easy calibration of the system.
All functions are controlled by a single computer, and the parameter settings are all completed by the buttons. The adjustment is convenient, the precision is high, stable and reliable.
CZJ-B4-A2-B2-C2,
I. Overview
The HZD-L/W vibration monitor can be connected to a variety of vibration sensors, such as magneto-electric speed sensors or eddy current sensors. When connected to the speed sensor, it can measure the vibration intensity (vibration speed RMS) or displacement (vibration amplitude) in the vertical or horizontal direction of the casing or housing.
When connected to an eddy current sensor, the radial and horizontal radial vibrations of the rotating machine shaft can be measured. The digital display can separately display the vibration values ​​of the two channels. Each channel has an independent alarm, hazardous circuit and relay contact output. Accurately set alarm and hazard values, alarms and dangerous delay times, and view alarm and hazard settings at any time.
The standard voltage (1~5V) or standard current (4~20mA) corresponding to the vibration value can be independently output for use by a computer, data collector, recorder or other automatic control system. Other voltages or currents can also be output as needed. The gain of each channel is automatically adjusted for easy calibration of the system.
All functions are controlled by a single computer, and the parameter settings are all completed by the buttons. The adjustment is convenient, the precision is high, stable and reliable.
It can measure the vibration of the casing or structure relative to the free space, that is, the absolute vibration. It is especially suitable for machines with ball bearings. In this machine, the vibration of the shaft can be transmitted to the casing more, so the monitor can be equipped with Connect the magnetic speed sensor to continuously measure and protect the rotating machine. The sensor should be installed with special care, without causing the sensor amplitude to be reduced, and the frequency influence is changed or the generated signal can not represent the real vibration of the machine. For the motor, Compressors, fans, etc. need to measure a large number of vibration points, and the monitor is especially suitable.
The main function realizes intelligent processing: alarm I value, II value can be adjusted by panel button to adjust the range value, no potentiometer adjustment, convenient on-site debugging
30 seconds without pressing the operation button, you can return to the running state. The rear panel has a current output terminal proportional to the vibration amplitude value. The recording output has an alarm delay function (any setting is 0~25.5 seconds).
Instrument
Measuring range: 0 to 10 mm/s, 0 to 20 mm/s (LD)
0 to 100 μm, 0 to 200 μm (ZD)
Frequency response: 10 ~ 1000Hz (in accordance with ISO2954 standard)
Display accuracy: 1%
Output accuracy: 1%
Output form: 4 ~ 20mA (two ways: vertical, horizontal)
Dimensions: 160 × 80 × 250 (mm)
Opening size: 150 × 75 (mm)
DIN69871 DAT SK40 Tool Holders
1. Spindle conicity standard:DIN69871A
2. ER collet chuck set with ER collet with flexibility used for gripping cutting tool, drill bit, draw bolt and so on.
3. When using, nut should be clamped tensed firstly with cutting tools then locked into the main body.
4. Always use the recommended wrench or spanner, unless, there might cause damage of cutting tools.
5. The spanner,pull stud chuck must purchase alone.
SK40 Collet Chuck Holder,SK Collet Chuck Holder,Keyless Drill Chucks,Intergrated Drill Chucks
SISHUI TELI TOOL CO.,LTD. , https://www.er-collets.com