HKYÂ Double Layer Steel Tiles Roll Forming Machine
Roll Forming Machine is made of feeding section, forming section and punching &Â cutting section, the finished profiles are flat and beautiful and high strength and durable. The finished profiles are widely used in construction sites, workshop, warehouses and so on.Â
Our machine features high durability and good appearance. Welcome to inquiry our machines, we will offer the lower price and better delivery time.Â
Description of Technical Parameters, as follows:Â
Down Layer: Color Steel Roofing/Wall Tile
Manual Un-coiler:
 Max Capacity: 5000kgs.
 Inner diameter of coil: 400-600mm.
 Manual with brake.
Leveler Device:
 Ensure the material level and straight.
 The width can be adjusted.
Main Forming System:
 Max feeding width: 1000 - 1250 mm.
 Product max. effective width: 640 - 1120 mm.
 Thickness of sheet: 0.1-1.0 mm.
 Material: GI sheet coil or Colored sheet coil etc.
 Motor Power: 5.5 kw forming system.
 Roller material: C45 steel.
 Diameter of shaft: Upper level: 80 mm; Down level: 95 mm.
 Forming station: Upper level: 12 rows; Down level: 14 rows.Â
 Surface of Roller: Chrome plating, Heat Treatment.Â
 Transmission: by chain and gear.
 Base Frame: 350 H steel welded.Â
 Machine Body: Electrostatic Spraying Treatment.
 Machine base is assembled & welded by high quality steel.
 Forming Speed: Upper level: 3m/min;Down level: 0-20m/min.
Hydraulic Cutting System:
 Cutting way: pause to cut.
 Oil pump station 1set.
 Hydraulic power: 4 kw hydraulic system.
 Hydraulic Station Structure: 300mm steel welded. Four guide columns.
 Blade Material: CR12mov with heat treatment HRC60-62.
 Cutting mould: 2 sets.
 Forced air cooling device available.
Electrical System (PLC&HMI Control System):
 Control system: HMI & PLC control panel.                                                            Â
PLC and HMI touch Screen (Taiwan Delta)
 Automatic length measurement.
 Automatic quantity measurement.
 Length measurement: Rotary Encoder.
 Over current protection for control system, aviation plugs.
 Power: 380V 50Hz 3Phase (as per local requirement)
Run-Out Table:
 Frame: 8# steel groove welded.
 Roller type.
 Quantity: 1 pc.
(They can be modified according to customer requirements)
Service Commitment &Â Quality Assurance
Installation: If necessary, engineer is available to service machinery overseas; but all the relevant cost and extra 100USD/day for our engineer will be paid by the buyer.Â
Warranty: 2 years since the machine leave seller's factory.Â
During the warranty period, it covers all spare parts of machines, if you find some spare parts were damaged, those new spare parts will be supplied free by us, but normal wear and tear excepted. And the freight should be bore equally by both parties.Â
We will provide the technical support for the whole life of the equipment.Â
Our Main Machines:Â
| Color Steel Tile Roll Forming Machine | Large-Span No-Girder Roll Forming Machine |
| Glazed Color Steel Tile Roll Forming Machine | Large-Span Curve Forming Machine |
| Double Layer Color Steel Tile Roll Forming Machine | Roller Shutter Door Machine |
| Rock Wool And EPS Sandwich Panel Forming Machine | Door Profile Machine |
| C/Z/U/T Purlin Roll Forming Machine | 4m - 6m Hydraulic Bending Machine & Shearing Machine |
| Light Steel Keel Roll Forming Machine | Auto Crimping Curved Roll Forming Machine |
| Color Steel Roof Ridge Cap Roll Forming Machine | Tooth Shape Corrugated Sheet Bending Machine |
| Steel Floor Deck Panel Roll Forming Machine | Hydraulic Full-Automatic De-coiler and Coil Car |
| Wind-Proof And Dust Shield Board Roll Forming Machine | Metal Sheet Foot Pedal Shear Machine |
| Highway Guard Rail Sheet Roll Forming Machine | Flattening Machine |
| Car Carriage Plate Roll Forming Machine | Simple &Â Heavy Slitting Machine |
| Environmental Anode Steel Plate Roll Forming Machine | New Type Cement Fiber Tile Forming Machine |
If you have any questions, please let me know them, IÂ will reply you in 24 hours and offer the optimum solution to you.Â
Please send me your email, and then I will send you Full Selection Machine Catalogues with all parameters of machines and products!
And I can send the Videos of Roll Forming Machines to you, so that you can directly see our machines!!!
WELCOME TO VISIT OUR COMPANY AT ANY TIME!!!!!
Waste Engine Oil Distillation Plant
The Waste engine Oil Distillation Plant is used to refine waste engine oil, crude oil and fuel oil after pyrolysis process into diesel grade oil, gasoline or and base oil. The daily capacity of this plant is about 5-6 tons.
Flow-chat of waste engine oi Distillation Plant
Advantage of waste engine oi distillation plant
1. Unique and original manufacturing and technology with our own formula of our equipments in China;
2. Unique horizontal design, high oil output with about 90% oil yield and 100% conversion rate, highly effective and profitable;
3. Good quality end product oil as the substitution of standard diesel oil in usage;
Automatic submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices;
4. Sync gas recycling system: fully burned after recycling and utilization, saving fuel and preventing pollution;
5. National patent, unique heat insulation shell: high efficiency temperature keeping, excellent energy-saving effect;
6. High condensing efficiency condensers with more oil output. Good quality oil, longer lifetime, and easy to clean;
7. National patent water film smoke scrubbers: efficient removal of the acid gas and dust of the smoke, environmental friendly to meet related national standards.
Technical Parameter of Waste engine Oil Distillation plant
|
NO. |
Item |
Technical Parameter |
|
1 |
Suitable Raw Materials |
Waste engine oil, Pyrolysis fuel oil, crude oil |
|
2 |
Structure |
Horizontal Type |
|
3 |
Capacity(24 hours) |
3.5-6.5Mt |
|
4 |
Work Pressure |
Normal Pressure |
|
5 |
Oil Yield |
80%-90% |
|
6 |
Power |
18 kw/H |
|
7 |
Cooling Method |
Cycle water |
|
8 |
Condensers |
4 pieces of Vertical condensers |
|
9 |
Emission Treatment |
New DE-sulfurization Smoke Scrubbers |
|
10 |
Heating Method |
Hot Air |
|
11 |
Type of Installation |
With Foundation |
|
12 |
Noise dB(A) |
≤85 |
|
13 |
Dimension of Reactor(mm) |
Ф2200×6000 Ф2500×8800 |
|
14 |
Operating Mode |
Semi-continuous Operation |
|
15 |
Main Chamber Weight (MT) |
10~13Mt |
|
16 |
Total Weight(MT) |
25~35Mt |
|
17 |
Installation Space Required |
35m*15m |
|
18 |
End Product |
Non-standard diesel oil |
|
19 |
Manpower |
1~2/shift |
|
20 |
Shipment Requirement |
2*40HC=Ф2200×6000 1*40HC+1*40FR=Ф2500×8800 |
Waste Engine Oil Distillation Plant
Distillation Plant,Oil Distillation,Waste Oil Recycling,Waste Engine Oil Recycling
Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclings.nl