PP Steel Wire Extension Pipe Extrusion Making Machine

PP Steel Wire Extension Pipe Extrusion Making Machine 


Extension Pipe Introduction: 
PP (polypropylene (PP plastic) is another good resin after nylon. it is a high-density, non-linear polymer side chain, high crystallization will, with excellent overall performance. When not colored white translucent, waxy;. lighter than polyethylene polyethylene transparency are more good than polyethylene rigid).
Features: Full environmental protection materials PP, inside and outside the spiral is uniform, smooth and shiny appearance, good flexibility, abrasion resistance, low cold resistant characteristics


Extension Pipe Application: 
1. indoor air intake, exhaust air conditioner;
2. The textile machine ventilation tube;
3. Civil machines, metal processing machines grinding set, vacuum tubes, all kinds of industrial vacuum cleaner tube;
4. Marine inflatable tube pump, pump tube;
5. Mine, mine pit aspirated, exhaust, drain;
6. All kinds of construction site with water, drainage, exhaust, dust emission;
7. A variety of mechanical ventilation exhaust pipe;
8. The wire and cable sheathing;
9. agricultural irrigation drainage;
Specifications: do 40-200MM, length of 1-10 meters, and a variety of colors according to customer requirements.



Equipment List: 
1. Single Screw Extruder
2. Extrusion Mould
3. Shaping Mould 
4. Shaping Machine 
5. Haul-off Machine
6. Cutting Machine
7. Rotation Stacker. 
Note: This line also can produce PP helix Hose. 

Machine Details: 

TRADE TERMS

1. Payment Term: 30% for prepayment by T/T, 70% for balanced payment by T/T, or L/C can be acceptable
2. Delivery Time: 40 days after receipt of prepayment.
3. Packing Method:  Packing film or wooden case
4. Guaranteed Time:  12 months

MACHINERUNNING TEST AND AFTER SERVICE

1. When machine finished, we will invited client come to our factory to check the machine and do the machine test. If machine is ok, then client pay for the balance. And inspect machine load the container.
2. When machine arrives client's factory, if client needs, we will send 1-2 engineer to client's factory do the machine installation and running test, and also train the local worker how to operate and maintain the machine. It is chargeable.
3. If have any question or problem on machine operation or maintain, welcome to contact to us by email or calling. We stand by 24 hours. 

  PP Steel Wire Extension Pipe Extrusion Making Machine 


Extension Pipe Introduction: 
PP (polypropylene (PP plastic) is another good resin after nylon. it is a high-density, non-linear polymer side chain, high crystallization will, with excellent overall performance. When not colored white translucent, waxy;. lighter than polyethylene polyethylene transparency are more good than polyethylene rigid).
Features: Full environmental protection materials PP, inside and outside the spiral is uniform, smooth and shiny appearance, good flexibility, abrasion resistance, low cold resistant characteristics


Extension Pipe Application: 
1. indoor air intake, exhaust air conditioner;
2. The textile machine ventilation tube;
3. Civil machines, metal processing machines grinding set, vacuum tubes, all kinds of industrial vacuum cleaner tube;
4. Marine inflatable tube pump, pump tube;
5. Mine, mine pit aspirated, exhaust, drain;
6. All kinds of construction site with water, drainage, exhaust, dust emission;
7. A variety of mechanical ventilation exhaust pipe;
8. The wire and cable sheathing;
9. agricultural irrigation drainage;
Specifications: do 40-200MM, length of 1-10 meters, and a variety of colors according to customer requirements.



Equipment List: 
1. Single Screw Extruder
2. Extrusion Mould
3. Shaping Mould 
4. Shaping Machine 
5. Haul-off Machine
6. Cutting Machine
7. Rotation Stacker. 
Note: This line also can produce PP helix Hose. 

Machine Details: 

TRADE TERMS

1. Payment Term: 30% for prepayment by T/T, 70% for balanced payment by T/T, or L/C can be acceptable
2. Delivery Time: 40 days after receipt of prepayment.
3. Packing Method:  Packing film or wooden case
4. Guaranteed Time:  12 months

MACHINERUNNING TEST AND AFTER SERVICE

1. When machine finished, we will invited client come to our factory to check the machine and do the machine test. If machine is ok, then client pay for the balance. And inspect machine load the container.
2. When machine arrives client's factory, if client needs, we will send 1-2 engineer to client's factory do the machine installation and running test, and also train the local worker how to operate and maintain the machine. It is chargeable.
3. If have any question or problem on machine operation or maintain, welcome to contact to us by email or calling. We stand by 24 hours. 

 

Wall Roll Forming Machine
Descriptions of Roll Forming Machine for Wall Panel:
1.This kind of Cold Roll Forming Machine(Wall Panel Machine) is widely used for making various metal wall panels for steel constructions, steel structure projects and containment systems etc.
2. This production line consists of feeding unit, uncoiler, feeding guide, roll forming machine, cutter, automatic stacker, hydraulic system and electric control system.
3. The line speed of this panel forming machine is 40m/min.
Components of Roll Forming Machine for Wall Panel:
1) Un-coiler:
Electric un-coiler, with coil-car
Load capacity = Max.10Tons;
2) Roll forming machine:
About 18steps to form;
Material of Roller: 45# steel with chromizing on surface
Voltage:380V/50Hz; Main line speed: 30m/min;
3) Hydraulic cutter:
1) Stop to cut, Post cut,
2) Cutting tool material: Cr12, Heat treatment
4) PLC control system:
Using Mitsubishi PLC Control the quantity, length automatically, LCD screen; remote control available.

Wall Roll Forming Machine

Wall Panel Machine,Wall Roll Forming Machine

Botou Xianfa Roll Forming Machine Factory , https://www.rollforming.nl