Model NO.: PE
Trademark: TSDC
Transport Package: GB
Specification: Mn13Cr2
Origin: Tangshan
HS Code: 84742090
Model NO.: PE
Trademark: TSDC
Transport Package: GB
Specification: Mn13Cr2
Origin: Tangshan
HS Code: 84742090
jaw crusher accessories:Jaw crusher is amongst the most advanced and reliable in the market and are highly productive in a variety of applications. Our jaw crushers are designed to exceed the primary crushing needs of customers in the mining, quarrying and recycling industries.
Our Jaw Crushers are used for the rapid, gentle crushing and pre-crushing of medium hard, hard, brittle and tough materials.With a combination of dynamic jaw profiles and highly efficient drive system these machines return some of the lowest operating costs in their class.Our jaws are usually constructed from cast steel, high manganese steel, metamorphic high manganese steel, super high manganese steel with ZGMn13 or Mn13Cr2 material.Jaw crushers are usually constructed in sections to ease the process transportation if they are to be taken underground for carrying out the operations.
Owing to the vast experience and knowledge of this field, we have been able to offer a wide range of high grade Jaw Plates. The offered plates find wide application in various stone crushing applications. Due to their large crushing ability, low maintenance, impeccable design and robust construction, these plates are highly demanded in the market.The manganese content is critical to the wear life of your crusher parts and the cost efficiency of your operation. Manganese content can range between 9% - 24% and is usually referenced as;
14% = 13-14% MN Â Â Â Â 18% = 17% - 19% MN Â Â Â Â 21% = 21% - 24% MN
Castings with any of these manganese percentages could be the right ones for your application. Â It just depends on what you're crushing. While you could use a higher percentage of manganese for your crushers jaw plates, 14% manganese can work fine for hard non-abrasive materials especially with Wear and Spare Parts heavy duty Jaws. Remember manganese must "work-harden" for optimum performance, which should be matched with material hardness. Â The hardness & abrasiveness of the rock to be crushed should determine the manganese content for your operation.
Critical factors for jaw crusher wear parts are how long they last and how efficiently they crush the material. Jaw weight, tooth profile and proper fit are all important considerations for efficient crushing. Â Efficiency requires proper tooth profile and this can be determined for each crushing application with the help of our experienced team here at Wear and Spare Parts.
Features to England moved Jaw plate. High manganese steel casting:
1.Material & standard:high manganese steel,alloy steel;JIS,DIN,ASTM,BS.
2.Moulding processing:lost wax process or waterglass sand.
3.Melting facilities:medium frequency electric induction furnace/electric arc furnace.
4.Casting Inspection:direct-reading spectrum instrument,metallographic analysis,ultrasonic inspection,magnetic particle inspection,mechanical properties inspection.
5.Heat treatment facilities:Special heating electric furnaces,special water pools etc special quenching equipments.
6.Surface treatment:shot blast cleaning.
7.Industrial categories:construction engineering machine industry,mineral processing,recycling industry,structural shredder parts,general machinery industry,dredging vessel,engineering ship industry and others.
8. Part Unit weight range: from 1.0kg up to 5000kgs.
9. Representative products: mill-ball,hammer,jaw plate,bucket teeth,big link pole,barre liner,grate plate,top grate,open grate, front wall and rack etc.
Â
| Type | size(mm*mm*mm) | weight(kg) | tooth number |
| 100*600(swing plate) | 595*305*40 | 38 | 23 |
| 100*600(fixed plate) | 636*267*44 | 40 | 24 |
| 150*750(swing plate) | 750*480*72 | 115 | 24 |
| 150*750(fixed plate) | 805*430*60 | 100 | 25 |
| 250*1000(swing plate) | 1000*790*95 | 350 | 24 |
| 250*1000(fixed plate) | 1055*700*95 | 312 | 25 |
| 250*1200(swing plate) | 1200*790*95 | 420 | 29 |
| 250*1200(fixed plate) | 1255*700*95 | 375 | 30 |
| 150*250(swing plate) | 445*250*40 | 25 | 9 |
| 150*250(fixed plate) | 425*300*40 | 25 | 8 |
| 250*400(swing plate) | 725*400*60 | 100 | 10 |
| 250*400(fixed plate) | 635*460*70 | 80 | 11 |
| 400*600(swing plate) | 1000*600*75 | 228 | 11 |
| 400*600(fixed plate) | 960*660*75 | 216 | 12 |
| 500*750(swing plate) | 1330*750*130 | 540 | 8 |
| 500*750(fixed plate) | 1170*820*110 | 780 | 7 |
| 600*900(fixed plate) | 1240*960*150 | 735 | 9 or12 |
Our Jaw Crushers are used for the rapid, gentle crushing and pre-crushing of medium hard, hard, brittle and tough materials.With a combination of dynamic jaw profiles and highly efficient drive system these machines return some of the lowest operating costs in their class.Our jaws are usually constructed from cast steel, high manganese steel, metamorphic high manganese steel, super high manganese steel with ZGMn13 or Mn13Cr2 material.Jaw crushers are usually constructed in sections to ease the process transportation if they are to be taken underground for carrying out the operations.
Owing to the vast experience and knowledge of this field, we have been able to offer a wide range of high grade Jaw Plates. The offered plates find wide application in various stone crushing applications. Due to their large crushing ability, low maintenance, impeccable design and robust construction, these plates are highly demanded in the market.The manganese content is critical to the wear life of your crusher parts and the cost efficiency of your operation. Manganese content can range between 9% - 24% and is usually referenced as;
14% = 13-14% MN Â Â Â Â 18% = 17% - 19% MN Â Â Â Â 21% = 21% - 24% MN
Castings with any of these manganese percentages could be the right ones for your application. Â It just depends on what you're crushing. While you could use a higher percentage of manganese for your crushers jaw plates, 14% manganese can work fine for hard non-abrasive materials especially with Wear and Spare Parts heavy duty Jaws. Remember manganese must "work-harden" for optimum performance, which should be matched with material hardness. Â The hardness & abrasiveness of the rock to be crushed should determine the manganese content for your operation.
Critical factors for jaw crusher wear parts are how long they last and how efficiently they crush the material. Jaw weight, tooth profile and proper fit are all important considerations for efficient crushing. Â Efficiency requires proper tooth profile and this can be determined for each crushing application with the help of our experienced team here at Wear and Spare Parts.
Features to England moved Jaw plate. High manganese steel casting:
1.Material & standard:high manganese steel,alloy steel;JIS,DIN,ASTM,BS.
2.Moulding processing:lost wax process or waterglass sand.
3.Melting facilities:medium frequency electric induction furnace/electric arc furnace.
4.Casting Inspection:direct-reading spectrum instrument,metallographic analysis,ultrasonic inspection,magnetic particle inspection,mechanical properties inspection.
5.Heat treatment facilities:Special heating electric furnaces,special water pools etc special quenching equipments.
6.Surface treatment:shot blast cleaning.
7.Industrial categories:construction engineering machine industry,mineral processing,recycling industry,structural shredder parts,general machinery industry,dredging vessel,engineering ship industry and others.
8. Part Unit weight range: from 1.0kg up to 5000kgs.
9. Representative products: mill-ball,hammer,jaw plate,bucket teeth,big link pole,barre liner,grate plate,top grate,open grate, front wall and rack etc.
Â
| Type | size(mm*mm*mm) | weight(kg) | tooth number |
| 100*600(swing plate) | 595*305*40 | 38 | 23 |
| 100*600(fixed plate) | 636*267*44 | 40 | 24 |
| 150*750(swing plate) | 750*480*72 | 115 | 24 |
| 150*750(fixed plate) | 805*430*60 | 100 | 25 |
| 250*1000(swing plate) | 1000*790*95 | 350 | 24 |
| 250*1000(fixed plate) | 1055*700*95 | 312 | 25 |
| 250*1200(swing plate) | 1200*790*95 | 420 | 29 |
| 250*1200(fixed plate) | 1255*700*95 | 375 | 30 |
| 150*250(swing plate) | 445*250*40 | 25 | 9 |
| 150*250(fixed plate) | 425*300*40 | 25 | 8 |
| 250*400(swing plate) | 725*400*60 | 100 | 10 |
| 250*400(fixed plate) | 635*460*70 | 80 | 11 |
| 400*600(swing plate) | 1000*600*75 | 228 | 11 |
| 400*600(fixed plate) | 960*660*75 | 216 | 12 |
| 500*750(swing plate) | 1330*750*130 | 540 | 8 |
| 500*750(fixed plate) | 1170*820*110 | 780 | 7 |
| 600*900(fixed plate) | 1240*960*150 | 735 | 9 or12 |
KINMAN, a leading manufacturer in China, specializing in a galaxy of Trailers and trailer parts .
Trailers: ATV trailer , utility trailer , Box Trailer , Watercraft Trailer, Snowmobile Trailer, Car Trailer , etc.
Trailer Parts & trailer accessories: Hitch Ball , Ball Mounts, Trailer Coupler , Trailer Jack , Winch, Wheel Hub , Trailer Light , Pan Fitting , Tie Down , etc.
For detailed information, pls feel free to contact us.
Tow Ball Mount, Welded Ball Mount, Ball Mount, Adjustable Ball Mount, towing ball mount
NINGBO KINMAN AUTO PARTS CO.,LTD. , https://www.kinmantrailer.com