2. Features
- It is applicable to conveying of media free from solid particles
- Continuous conveying, small pressure pulsation
- Low noise, long service life
- Strong suction capacity, auxiliary equipment without the need for vacuumization.
- Compact structure, small volume, light weight.
 -It can be directly driven by motor or other power.
- No foam or vortex in the conveying process.
 -It can be used for conveying of high viscosity and high temperature media.
3.  Structure
4.  Technical parameter
| Flow | 1-320m3/h |
| Pressure | ≤10Mpa |
| Speed | ≤5000r/min |
| Viscosity | 3~ 7000 mm2/ s |
| Temperature | -20ºC~200ºC |
5. Application Area
To transfer various medium with lubricating property or partial lubricating property, but without solid particles.
Including lubricant (Â oil) (Â for example, lubrication oil, machine oil, hydraulic oil, gear oil, etc. ), water glycol, lubrication grease, light diesel oil, residual fuel (Â oil) (Â such as heavy oil, coal tar, etc. )Â and other sticky chemical medium.
Are widely used in the fields of machinery, petroleum &Â chemical industry, metallurgy, iron &Â steel, electric power, marine, Centralized lubrication unit, Lube circulation system, etc
6.  Pump on site
7.  Certification
8. Contact us
Â
Website: http://www.xinglongpump.com
Hangzhou Xinglong Pump Co.,Ltd.
Add :Â No. 1, Fengcheng Road, Pingyao Town, Yuhang District, Hangzhou
Tel:(86)-571-88548058Â Â Â Â Â Â Â Â Â Â Â Fax: (86)-571-88548016
Â
Die casting is a Aluminium or Zinc metal casting process that is characterized by forcing nolten metal under high pressure into a die mold cavity. The mold cavity is created using two hardened tool steel dies which have been machined into shape and work similarly to an injection mould during the process. Most die castings are made from non-ferrous metals, specifically zinc, copper, aluminium, magnesium, lead, pewter, and tin-based alloys. Depending on the type of metal being cast, a hot- or cold-chamber machine is used.
The casting equipment and the metal dies represent large capital costs and this tends to limit the process to high-volume production. Manufacture of parts using die casting is relatively simple, involving only four main steps, which keeps the incremental cost per item low. It is especially suited for a large quantity of small- to medium-sized castings, which is why die casting produces more castings than any other casting process. Die castings are characterized by a very good surface finish (by casting standards) and dimensional consistency.
Die Casting Mould,Pressure Washer Aluminium Die Casting,Power Tools Aluminium Die Casting Mould,Filter Rear Cover Die Casting Mould
Zhejiang Ceeto Molding Technology Co.,Ltd. , https://www.ceetomold.com