1) QT6-15 concrete machine block to make money according to the standard of intenational.
2) The vibration system contains platform vibration and mould vibration, so the products is very close-grained and produced quickly.
3) Machine frame: Maganese steel with China national standard.
4) PLC intelligent control. Man-machine interface, control system equipped with complete logic control, production program, malfunction diagnosis system and remote control function.
5) The computer is of fault diagnosis system. Warning signal is propitious to eliminate the fault. Combine with long-distance controlling system, it can achieve scrutiny, controlling, diagnosis.
Parameters
| Machine dimmenssion | 7100*1500*3000mm |
| Total weight | 6000KGS |
| Main Vibration | platform vibration |
| Vibration frequency | 4500-5100r/min |
| Pallect size | 850*680mm |
| Overall power | 31.25KW |
| Vibration force | 60KN |
| Molds | As customer's requirement |
| Forming cycle | 15-20s |
| Rated pressure | 21MPA hydraulic pressure |
| Mixer | JS500 mixer |
| Machine Workplace | 200-300m2Â |
| Voltage | 220V/380V/415V as customer local voltage needs |
| Finished blocks | hollow blocks, paver,solid blocks, curbstone,porous blocks,stander bricks etc |
Production line
Block sample
1. The whole brick machine production line equipment is mainly the full container sea shipping,
2. Brick machine equipments finish manufacturing and testing, next to clean up, and then do another paint protection,
3. Before shipment to use plastic film winding, wrapped the entire brick machine in case of water or moisture,
4. Then load brick machines into the container by forklift,
5. During loading to tighten the machine with reinforcement ring in container, so as to avoid the damage by transport bumps on the brick machine.
Our service
Pre-sale
(1) Professional suggestions (raw material matching, machine selection, planÂ
The condition of build factory, feasibility analysis for brick machine production line)
(2) Device model choice (recommend the best machine according to the raw material,
capacity and the size of brick)
(3) Welcome to visit our factory and production line anytime
Sale:
(1) Update the production scheduling in time
(2) Quality supervision
(3) Product acceptance
(4) Shipping on time
After-sale:
(1) The engineer will guide to carry out the plant at the clients side.
(2) Set up, fix,and operateÂ
(3) Will not stop training the operator until they are satisfied at clients side.
(4) 24 hours service
(5) Recall clients regularly ,get feedback in time,keep well communication with each other.
Our factory
Shiyue Machinery is located in Linyi,Shandong. With advanced technologies and rich experiences on manufacture. We have specialized in stationary block machine,mobile block machine, clay block machine, crusher,pipe making machine, pole making machine,concrete mixing plant etc.After 27-year's effort,we have receive good reputation from many countries such as India, the United States, Russia, the United Kingdom, the Philippines, Canada, Australia, South Africa, Pakistan, Brazil, Malaysia, Sri Lanka, Mexico, Nigeria, Kenya etc.What's more,our machines have won'Product patent award',and 'product innovation award' and so on.Shiyue machinery your best choice for your business
Â
1.Question:Does the machine could change mold?
Answer:Yes,this machine could change different kinds of mold.The machine could produce interlock, paver size depending on your local requirements.
2.Question:What is the electric voltage and rate?
Answer:Our local electric voltage is 380v, 3phase, 50hertz, the electricl voltage can be revised according to local situation.
3.Question:How about the service life of this machine?
Answer:This machine could work for about 6-10 years if your side maintain well.
4.Question:What's your machine warrenty?
Answer:12 months guarantee,we send more spare parts for you when shipping machine to you.
5.Question:Â The mode of transportation.
 Answer: by sea, by land or by rail according to customer local need
Â
1) QT6-15 concrete machine block to make money according to the standard of intenational.
2) The vibration system contains platform vibration and mould vibration, so the products is very close-grained and produced quickly.
3) Machine frame: Maganese steel with China national standard.
4) PLC intelligent control. Man-machine interface, control system equipped with complete logic control, production program, malfunction diagnosis system and remote control function.
5) The computer is of fault diagnosis system. Warning signal is propitious to eliminate the fault. Combine with long-distance controlling system, it can achieve scrutiny, controlling, diagnosis.
Parameters
| Machine dimmenssion | 7100*1500*3000mm |
| Total weight | 6000KGS |
| Main Vibration | platform vibration |
| Vibration frequency | 4500-5100r/min |
| Pallect size | 850*680mm |
| Overall power | 31.25KW |
| Vibration force | 60KN |
| Molds | As customer's requirement |
| Forming cycle | 15-20s |
| Rated pressure | 21MPA hydraulic pressure |
| Mixer | JS500 mixer |
| Machine Workplace | 200-300m2Â |
| Voltage | 220V/380V/415V as customer local voltage needs |
| Finished blocks | hollow blocks, paver,solid blocks, curbstone,porous blocks,stander bricks etc |
Production line
Block sample
1. The whole brick machine production line equipment is mainly the full container sea shipping,
2. Brick machine equipments finish manufacturing and testing, next to clean up, and then do another paint protection,
3. Before shipment to use plastic film winding, wrapped the entire brick machine in case of water or moisture,
4. Then load brick machines into the container by forklift,
5. During loading to tighten the machine with reinforcement ring in container, so as to avoid the damage by transport bumps on the brick machine.
Our service
Pre-sale
(1) Professional suggestions (raw material matching, machine selection, planÂ
The condition of build factory, feasibility analysis for brick machine production line)
(2) Device model choice (recommend the best machine according to the raw material,
capacity and the size of brick)
(3) Welcome to visit our factory and production line anytime
Sale:
(1) Update the production scheduling in time
(2) Quality supervision
(3) Product acceptance
(4) Shipping on time
After-sale:
(1) The engineer will guide to carry out the plant at the clients side.
(2) Set up, fix,and operateÂ
(3) Will not stop training the operator until they are satisfied at clients side.
(4) 24 hours service
(5) Recall clients regularly ,get feedback in time,keep well communication with each other.
Our factory
Shiyue Machinery is located in Linyi,Shandong. With advanced technologies and rich experiences on manufacture. We have specialized in stationary block machine,mobile block machine, clay block machine, crusher,pipe making machine, pole making machine,concrete mixing plant etc.After 27-year's effort,we have receive good reputation from many countries such as India, the United States, Russia, the United Kingdom, the Philippines, Canada, Australia, South Africa, Pakistan, Brazil, Malaysia, Sri Lanka, Mexico, Nigeria, Kenya etc.What's more,our machines have won'Product patent award',and 'product innovation award' and so on.Shiyue machinery your best choice for your business
Â
1.Question:Does the machine could change mold?
Answer:Yes,this machine could change different kinds of mold.The machine could produce interlock, paver size depending on your local requirements.
2.Question:What is the electric voltage and rate?
Answer:Our local electric voltage is 380v, 3phase, 50hertz, the electricl voltage can be revised according to local situation.
3.Question:How about the service life of this machine?
Answer:This machine could work for about 6-10 years if your side maintain well.
4.Question:What's your machine warrenty?
Answer:12 months guarantee,we send more spare parts for you when shipping machine to you.
5.Question:Â The mode of transportation.
 Answer: by sea, by land or by rail according to customer local need
Â
We started to manufacture Lighting Pole from 2001 and exported from 2003. We got CE certificate for Lighting pole from 2015.
Our firm introduced whole set of good-sized numerical control hydraulic folding equipment(1280/16000) as well as equipped with a series of good-sized professional equipments of armor plate-flatted machine, lengthways cut machine, numerical control cut machine, auto-closed up machine, auto-arc-weld machine, hydraulic redressing straight machine, etc. The firm produces all sorts of conical, pyramidal, cylindrical steel poles with production range of dia 50mm-2250mm, thickness 1mm-25mm, once taking shape 16000mm long, and large-scale steel components. The firm also is equipped with a multicolor-spayed pipelining. At the meantime, for better service to the clients, our firm founded a branch com. The Yixing Jinlei Lighting Installation Com, which offers clients a succession of service from design to manufacture and fixing.
Street Lighting Pole, Lamp Pole, Powder Coated Lighting Pole
Jiangsu Xinjinlei Steel Industry Co., Ltd. , https://www.steel-pole.com