Super Scanner Handheld Metal Detector for Examination Room

The Securitex-Hand Held Metal Detector Scanner (SHMDS-1/ESH-10) from Securitex is a very user friendly portable metal detector capable to detect all concealed metallic objects including guns, small knives to metallic parts like machine parts, screws, blade, box cutters and even tiny jewelry or electronic components carried by passengers into aircraft, metal machining factories or even sensitive installation. This system is very suitable for use at airports, seaports, banks, public buildings, prisons, stadiums, hospitals, schools. Oil and Gas facilities, Military installation etc. The SHMDS-1/ESH-10 detector is very durable, refined and is extremely light weight (220g) very suitable for user's convenience. The detector provides a large scanning surface to permit quick and thorough scanning and it has vibration function for avoiding any noise or disturbance.
Environmental
The metal detector operates in a temperature range of (-15degree Celsius to +45degree Celsius)
If the minimum distance is maintained over 1 M ;
 
The metal detector does not affect the operation of cardiac pacemakers, mobile phones and any magnetic recording materials (tapes, cards, diskettes, etc.).
 
The metal detector is immune to electromagnetic interference of the frequency bands of LF, MF, HF, VHF, UHF, etc.
 
The metal detector does not cause any interference or be interfered by walk through metal detector, and X-ray baggage inspection system, walkie-talkie radio set and any other electronic equipment operating system in close proximity. 

SPECIFICATION & DIMENSION
Indicators
Solid Yellow LED: AL - Target Detected  
Flashing Green LED: PW - Power On  
Flashing Red LED: BT - Low Battery Indicator
 
Operating Temperature: -15degress to +45 Degrees Centigrade 
Sound Mode: Buzzer with Red LED    
Operating Frequency: 30 KHz 
Vibration Mode: Vibrator with Red LED    
Reset Time: 0.5 Second, Automatic 
Battery Type: Single 9 Volt Alkaline or Ni-Cd   
Weight: 220g
Battery Life (NiCd): 30 to 40 Hours (Ni-Cd)    
Width : 3.03" (77mm) 
Battery Life (Alkaline): 28 Hours (Alkaline)   
Thickness : 1.02" (26mm) 
Length  : 14.76" (375mm)

Package List:

1 x metal detector
1 x english manual
 
How to Use a Hand-Held Metal Detector?

Different metal detectors use the same basic electrical devices to detect the presence of metal. An oscillator creates radio waves along a coil of wires. The receiver in the metal detector picks up the radio waves and produces a beeping noise. When a metal object passes near the wire coils, a magnetic field is created that alters the radio waves being sent to the transmitter and also alters the beeping noise, indicating to the user that metal has been found. Operators use hand-held metal detectors to find metal in many situations, especially for security purposes.
Put batteries in your hand-held metal detector. Most take 9V batteries in the rear end of the handle of the metal detector.
Turn on your metal detector using the "On" and "Off" button that is usually located on the handle close to the scan area. Not all hand-held metal detectors are the same. Fisher, for example, has a three-way power button, while Whites Electronics has a traditional On/Off button.
Check that the indicator light is on, showing that the metal detector works. If your metal detector does not have an indicator light or any other indicator, wave the metal detector over an obviously metal object, such as your car, and wait for the signal that the metal detector is on. The signal could be a beeping sound, a vibration or a red LED light turning on.
Set any special features on your hand-held metal detector, such as plug-in ear phones, volume controls or sensitivity controls.
Hold your hand-held metal detector as close as possible to an area where you need to search for metal. The closer the metal, the clearer the signal.




F&Q
 
A: Payment Terms:

T/T, Western Union, Paypal, Bank Transfer

 B: Shipment:

1. By EMS, DHL, FedEx, TNT, UPS or other express.
2. By your own forwarding agent.
3. Buyer can choose the desired shipping method when ordering.

C: After-sale service:

All products have been checked and packaged in good condition before dispatch.

D: Lead Time:

After the payment, general orders will be delivered from our factory within 3-5 working days.

Customers Service

Please contact us through email or phone, we will assist you in any way possible
China working hours 9:30-18:30 Monday-Friday online service to help buyers solving problem.

Welcome the friends from all over the world to visit us !

The Securitex-Hand Held Metal Detector Scanner (SHMDS-1/ESH-10) from Securitex is a very user friendly portable metal detector capable to detect all concealed metallic objects including guns, small knives to metallic parts like machine parts, screws, blade, box cutters and even tiny jewelry or electronic components carried by passengers into aircraft, metal machining factories or even sensitive installation. This system is very suitable for use at airports, seaports, banks, public buildings, prisons, stadiums, hospitals, schools. Oil and Gas facilities, Military installation etc. The SHMDS-1/ESH-10 detector is very durable, refined and is extremely light weight (220g) very suitable for user's convenience. The detector provides a large scanning surface to permit quick and thorough scanning and it has vibration function for avoiding any noise or disturbance.
Environmental
The metal detector operates in a temperature range of (-15degree Celsius to +45degree Celsius)
If the minimum distance is maintained over 1 M ;
 
The metal detector does not affect the operation of cardiac pacemakers, mobile phones and any magnetic recording materials (tapes, cards, diskettes, etc.).
 
The metal detector is immune to electromagnetic interference of the frequency bands of LF, MF, HF, VHF, UHF, etc.
 
The metal detector does not cause any interference or be interfered by walk through metal detector, and X-ray baggage inspection system, walkie-talkie radio set and any other electronic equipment operating system in close proximity. 

SPECIFICATION & DIMENSION
Indicators
Solid Yellow LED: AL - Target Detected  
Flashing Green LED: PW - Power On  
Flashing Red LED: BT - Low Battery Indicator
 
Operating Temperature: -15degress to +45 Degrees Centigrade 
Sound Mode: Buzzer with Red LED    
Operating Frequency: 30 KHz 
Vibration Mode: Vibrator with Red LED    
Reset Time: 0.5 Second, Automatic 
Battery Type: Single 9 Volt Alkaline or Ni-Cd   
Weight: 220g
Battery Life (NiCd): 30 to 40 Hours (Ni-Cd)    
Width : 3.03" (77mm) 
Battery Life (Alkaline): 28 Hours (Alkaline)   
Thickness : 1.02" (26mm) 
Length  : 14.76" (375mm)

Package List:

1 x metal detector
1 x english manual
 
How to Use a Hand-Held Metal Detector?

Different metal detectors use the same basic electrical devices to detect the presence of metal. An oscillator creates radio waves along a coil of wires. The receiver in the metal detector picks up the radio waves and produces a beeping noise. When a metal object passes near the wire coils, a magnetic field is created that alters the radio waves being sent to the transmitter and also alters the beeping noise, indicating to the user that metal has been found. Operators use hand-held metal detectors to find metal in many situations, especially for security purposes.
Put batteries in your hand-held metal detector. Most take 9V batteries in the rear end of the handle of the metal detector.
Turn on your metal detector using the "On" and "Off" button that is usually located on the handle close to the scan area. Not all hand-held metal detectors are the same. Fisher, for example, has a three-way power button, while Whites Electronics has a traditional On/Off button.
Check that the indicator light is on, showing that the metal detector works. If your metal detector does not have an indicator light or any other indicator, wave the metal detector over an obviously metal object, such as your car, and wait for the signal that the metal detector is on. The signal could be a beeping sound, a vibration or a red LED light turning on.
Set any special features on your hand-held metal detector, such as plug-in ear phones, volume controls or sensitivity controls.
Hold your hand-held metal detector as close as possible to an area where you need to search for metal. The closer the metal, the clearer the signal.




F&Q
 
A: Payment Terms:

T/T, Western Union, Paypal, Bank Transfer

 B: Shipment:

1. By EMS, DHL, FedEx, TNT, UPS or other express.
2. By your own forwarding agent.
3. Buyer can choose the desired shipping method when ordering.

C: After-sale service:

All products have been checked and packaged in good condition before dispatch.

D: Lead Time:

After the payment, general orders will be delivered from our factory within 3-5 working days.

Customers Service

Please contact us through email or phone, we will assist you in any way possible
China working hours 9:30-18:30 Monday-Friday online service to help buyers solving problem.

Welcome the friends from all over the world to visit us !

The Dual Power Electric Heater is assembled by dual power Thick Film Heating Tube, protective casing, over-temperature protective system, spirial column, top and bottom end cap and wire connector. 

The major advantage of the dual power Electric Heater is several chioces of powers (800w,1400w and 2200w)on one thick film heater. This heat which is connecting with PCB can produces 45℃-100℃ hot water for special application. 

This Electric Heating Element was assembled with over-temperature protective system(automatic reset and/or manual reset). Over-temperature protective system can directly access heating power supply circuit to control it connection or disconnection.Circuit Control Board can adjust the outlet water in multiple temperature levels.

The major application of dual power electric heater is for Hot Water Dispenser,hot water purifier and tea making machine. 

 

Dual Power Electric Heater

50Mm Electric Heater,Small Electric Heater,Wall Mounted Electric Heaters,Electric Room Heater

XINXIANG JIEDA PRECISION ELECTRONICS CO.,LTD , https://www.tubularheater.de