Glass Machinery-Glass Vertical Washer Cleaner and Dryer

Glass machinery-glass vertical washer cleaner and dryer

1. It is painted by an electrostatic paint for protection against a rust and scratchs.
2. Heating up plates and the Water tank have a covering (Against a rust of 10 years of a guarantee).
3. Conic moving gears are made from a special steel alloy.
4. Nuts corrosion-proof, apertures for nuts aluminium.
5. A working direction of action with left on the right party.
6. A water tank with a heater.
7. Filtered fan for dust-free air expulsion.
8. Brushes from above and from below have adjustment for approach.
9. The electrosystem corresponds to safety rules.
10. The washing branch has 6 brushes. 

 Additional features : 

1. Heating up plates and water tank from stainless steel.
2. Special brushes for reflecting glasses.
3. Adjustment of speed of a running tape.
4. Covers with glass windows.
5. Washer and dryer  
6. LOW-E option /Coating glass washing
7. Power: 380V 50HZ 3 phase or 3 Phase,220v ,60hz
8. CE CERTIFICATE for European Union 

2. Air knife drying Description:
Normal temperatures, without the drying button to be opened. Fan drying the glass is mainly used in condition of low temperature (below 0 °) and the humidity of the air (such as rain and snow weather, wet weather) circumstances, which is not good effect caused by these conditions
 
3. The use of materials: section 01 and 03 40 * 80 * 3mm Square steel (Q235B) which is welded together.
 Section 2 are all high-quality stainless steel (304 materials). 4mm thickness shell, and there is 1.5mm thickness stainless steel for six doors. Roof and bottom use 5mm thick stainless steel. And1.5mm thickness stainless steel for water tank. Three pairs of soft brushes (6), can wash the coated glass, LOW-E glass.
 
4.Other materials configuration:
1) All washing section use solid rubber roller,
2) Section 01,02 and 03 respectively controlled by converter (Taiwan Delta) for regulating the washing speed.
3) The high-pressure blower fan. Circulating air can be heated, air knives and prop material adopt all model 304 stainless steel frame.
4) Using two circulating water filtration devices, also can be heated.
5) Bearings from domestic well-known brands: Harbin Bearing
Technical parameter






 

Glass machinery-glass vertical washer cleaner and dryer

1. It is painted by an electrostatic paint for protection against a rust and scratchs.
2. Heating up plates and the Water tank have a covering (Against a rust of 10 years of a guarantee).
3. Conic moving gears are made from a special steel alloy.
4. Nuts corrosion-proof, apertures for nuts aluminium.
5. A working direction of action with left on the right party.
6. A water tank with a heater.
7. Filtered fan for dust-free air expulsion.
8. Brushes from above and from below have adjustment for approach.
9. The electrosystem corresponds to safety rules.
10. The washing branch has 6 brushes. 

 Additional features : 

1. Heating up plates and water tank from stainless steel.
2. Special brushes for reflecting glasses.
3. Adjustment of speed of a running tape.
4. Covers with glass windows.
5. Washer and dryer  
6. LOW-E option /Coating glass washing
7. Power: 380V 50HZ 3 phase or 3 Phase,220v ,60hz
8. CE CERTIFICATE for European Union 

2. Air knife drying Description:
Normal temperatures, without the drying button to be opened. Fan drying the glass is mainly used in condition of low temperature (below 0 °) and the humidity of the air (such as rain and snow weather, wet weather) circumstances, which is not good effect caused by these conditions
 
3. The use of materials: section 01 and 03 40 * 80 * 3mm Square steel (Q235B) which is welded together.
 Section 2 are all high-quality stainless steel (304 materials). 4mm thickness shell, and there is 1.5mm thickness stainless steel for six doors. Roof and bottom use 5mm thick stainless steel. And1.5mm thickness stainless steel for water tank. Three pairs of soft brushes (6), can wash the coated glass, LOW-E glass.
 
4.Other materials configuration:
1) All washing section use solid rubber roller,
2) Section 01,02 and 03 respectively controlled by converter (Taiwan Delta) for regulating the washing speed.
3) The high-pressure blower fan. Circulating air can be heated, air knives and prop material adopt all model 304 stainless steel frame.
4) Using two circulating water filtration devices, also can be heated.
5) Bearings from domestic well-known brands: Harbin Bearing
Technical parameter






 

Drilling Bits

Product Description
1. Description
In the drilling process, the drill bit is the main tool to break the rock and the wellbore is formed by the drill bit breaking the rock. How well a wellbore is formed and the length of time it takes are not only related to the characteristics of the rock in the drilled formation and the performance of the drill bit itself, but also to the degree of mutual matching between the drill bit and the formation. Reasonable selection of drill bits plays an important role in increasing the drilling speed and reducing the overall cost of drilling.
The drill bit is one of the important tools for oil drilling work. Whether the drill bit adapts to the rock properties and its quality plays a very important role in the selection of drilling technology, especially in terms of drilling quality, drilling speed and drilling cost.

2. Specifications we can offer
At present, there are many types of drill bits used in the petroleum industry and mining industry. The drill bits are classified according to different drilling methods. They can be divided into PDC drill bits, roller cone bits, scraper bits and mining diamond coring bits. These drill bits are the most basic drill bits and we all can provide.

Drilling Bits,Masonry Drill Bit,Metal Drill Bit,Diamond Drill Bit

JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.nbxitecdrilling.com