Understanding these can extend the life of a rapid temperature change chamber

Advanced and reasonable structural design, functional components and components with advanced level of rapid temperature change test chamber set a variety of models in one of the functional design, the use of touch-type digital instrument, with programming, curve display, PID self-tuning, fault display and other functions. One-time solution to your needs, to meet the diversity and variability of different products in different tests, improve machine utilization and work efficiency.

The test chamber is suitable for the cold resistance test of electronic and electrical products and parts and components, and the adaptability test under the conditions of rapid temperature change or gradual change. It is particularly suitable for environmental stress screening tests of electrical and electronic products. The rapid temperature change test box shall be operated and maintained by a special person. The user shall establish a device usage file to facilitate the maintenance of the equipment.

The rapid temperature change test chamber can provide a more rigorous test environment, shorten the test time and reduce the test cost for different electronic components, temperature conditions encountered in the actual use of the environment, change in the range of ambient temperature differences and rapid temperature changes, but must pay attention to It may have an additional impact on material testing and result in a non-use destruction test.

In the high temperature test of the test chamber, if the temperature does not reach the test temperature, the electrical system can be checked and the faults can be eliminated one by one. If the temperature rises very slowly, it is necessary to look at the wind circulation system and see if the adjustment baffle of the wind circulation is normally open. Conversely, check whether the motor operation of the wind circulation is normal. If the temperature rises directly, over-temperature protection, then the controller fails and the control instrument must be replaced. If the temperature overshoots badly, then you need to set the PID setting parameters. Use the file to record the start and end time of each operation of the equipment and the type of test and the ambient temperature. When the equipment fails, the rapid temperature change test chamber should describe the fault phenomenon as detailed as possible, and the contents of the equipment maintenance and repair should also be exhausted. It may be recorded in detail that the interior and surroundings of the test chamber should be kept clean.

Can adapt to long-term, stable, safe and reliable production needs. The equipment is mainly aimed at adaptability tests of electricians, electronic products, and their original devices, and other materials stored, transported, and used in high-temperature, low-temperature, rapidly changing environments. The test equipment is mainly used to test the physical and other relevant characteristics of the product under the conditions of low temperature, high temperature and conditions according to the requirements of the national standard or the user's own requirements. After testing, the product performance is judged by testing. Whether it can still meet the predetermined requirements for product design, improvement, identification and factory inspection.

The shell of the rapid temperature change test box is made of cold-rolled steel plate, and the surface is sprayed with plastic, which is beautiful and durable. The inner chamber uses a stainless steel plate and the inner surface is flat and clean. The right side of the studio is equipped with circulating devices, heaters, cooling evaporators and other components. At the top is equipped with a pair of blower motor, so that the hot and cold air is circulated into and out of the studio to ensure the temperature requirements of the studio.