Application
Measuring the volume or cold potable water passing through the pipeline.
Features
Dry type small light magnetic drive, free rotating register easy and long term clear reading etc.
Magnet resistance wigh LXH-15-20B
Note
1. Technical data confirm to international standard ISO4064.
2. Available with different length on request
3. Available in hot water meter on request.ive boundary
At high zone is± 2% from transitional flow rate(qt) to overload flow rate(QS)
Accessories
Each meter has one set coupling optional: 2pcs coupling, 2pcs coupling nuts and 2pcs washers.
Installation requirements
The meter should be installed in horizontal position with the direction of the flow asÂ
indicated by the arrow cast in the meter body with the register face upwards.
Pipeline must be flushed before installation.
The meter should be constantly full of water during operation.
Maximum Permissible Error
In the lower zone from Qmin inclusive up to but excluding Qt is ±5%.
In the upper zone from Qt inclusive up to and including Qs is: cold water meter ±2%.
| DN(mm) | Â | 15 | 20 |
| Size(inch) | Â | 1/2" | 3/4" |
| Q4(m³/h) |  | 3.125 | 5 |
| Q3(m³/h) |  | 2.5 | 4 |
| R80 | Q2(l/h) | 50 | 80 |
| Â | Q1(l/h) | 31.25 | 50 |
| R100 | Q2(l/h) | 40 | 64 |
| Â | Q1(l/h) | 25 | 40 |
| Max.Reading (m³) | 9999 | ||
| Min.Reading (Liter) | 005 | ||
| Max.Pressure (bar) | 16 | ||
| Pressure Loss (ΔP) | 63 | ||
| Max.Temperature | T30 or T90 | ||
Â
We produce and stock a big range of spares parts for outdoor gasoline equipment chainsaws,Brush Cutter and Hedge Trimmer.That is ,we are your big warehouse of petrol garden equipment in China.
Our spares are related to products
Chinese 45cc 52cc 58cc chainsaw
Chinese 62cc chainsaw
chinese 26cc chainsaw
MS210/MS230/MS250 chainsaw
MS380/MS381 chainsaw
MS070 chainsaw
HUS137 142 chainsaw
HUS365 chainsaw
4 stroke 139 brush cutter
Chinese 43cc brush cutter
GX35 brush cutter
Hedge trimmer
Earth drill
More.....
Spare parts details
| Saw chain | Guide bar | Cylinder kits | Piston kits | Clutch | Handle bar | Carburetor kits | Oil tank |
| Air filter | Starter pulley | Spark plug | Chain adjuster | Muffler | Crankshaft | Fly wheel | Ignition coil |
| Chain sprocket | Brush cutter head | on/off switch | Gasket set | more... |
Please contact us for more ....... |
||
Parts include of Chain, Bars, cylinder kits,piston kits,clutch,handle bar,carburetor,tank,air filter,starter pulley,spark plug,chain adjuster,saw chain,guide bar,buffler,crankshaft,fly wheel,lgnition coil,chain sprocket,.....
Gasoline garden machines parts
chainsaw parts,brush cutter spare parts,hedge trimmer spare parts,chainsaw replacement parts,chain saw parts
Yongkang Dancy Machine Co., LIMITED , http://www.weldertool.com