How to maintain the sewage suction truck after heavy rain

Summer is characterized by fierce sun and unexpected heavy rain. Many people will get wet due to heavy rainfall. Heavy rain affects not only people but also vehicles. Many vehicles will fail after heavy rain, and the movement must be performed. Check maintenance so that it can play a positive role again. Sewage suction vehicles are commonly used in urban sanitation. How do you maintain the sewage suction truck after heavy rainfall? Xiaobian introduces some methods for you.

图片8_副本

Maintenance of sewage suction truck after heavy rain

1. Check the oil in the suction car to see if it has been carried out. If the oil enters the water, its function will change, and it will no longer be lubricated. If the engine is not lubricated with oil, it will wear out and be damaged.

2. Check the suction wheel's gearbox to see if there is gearbox inside. If the gearbox is filled with water, its gear oil will not function properly after it has gone bad. There will be gear damage and wear accidents.

3. Check if the electric line connector of the sewage suction truck is not immersed in water. If soaked, it will rust and cannot provide normal operation.

4. The brake fluid of the suction truck also needs to be inspected to ensure that there is no water in the brake fluid and it will not cause its internal deterioration.

5. If there is water in the exhaust pipe of the suction truck, it needs to be discharged in time to avoid affecting the catalytic converter and oxygen sensor.

6. Check if there is water in the battery of the suction truck. If there is water, replace the battery or electrolyte in time.

7. If the articles such as seat covers and floor mats of the sewage suction vehicle are blistered, they need to be dried in time under the sun to avoid long-term accumulation of mildew.

8. It is necessary to be able to re-clean the surface of the vehicle once. Although heavy rain has washed all dirt on the surface of the vehicle very cleanly, there may be leaves, silt, etc., which need to be washed away. There is also the possibility that the chassis will be washed. When it is splashed with water, it is necessary to erase the water traces on the chassis and then perform anti-rust treatment.

9. Open all the openable parts of the vehicle's door, trunk, etc. to make it completely ventilated and breathable.


SMT nozzles are used to pick up components from component feeders and placing the components to PCB board after solder paste printing process. These nozzles are used by high speed pick and place and flexible component mounter machines. We are offering all types of SMT nozzles for almost All brands and models of SMT machines. We also provide OEM nozzles for special components aside from standard SMT nozzles. We distribute original and high copy units SMT nozzles.

SMT Nozzle

SMT Nozzle,SMT Panasonic Nozzle,SMT LED Nozzle,Original SMT Nozzle,Nozzle For Smt,Smt Nozzle Price,Smt Nozzle Holder

ShenZhen KDW Electronics Co.,Ltd , https://www.smtsplicetape.com