· China's tire exports will add two more duty-free countries

Recently, the reporter learned from the Dongying Inspection and Quarantine Bureau of Shandong Province that the preferential tariff policy of the China-ASEAN Free Trade Area has made new progress. Tire export enterprises can use the preferential policies of origin to improve product competitiveness.
The reporter learned that the preferential tariff policy of the China-ASEAN Free Trade Area refers to the signatories of the China-ASEAN Free Trade Area (including China, Brunei, Cambodia, Indonesia, Laos, Malaysia, Myanmar, the Philippines, Singapore, Thailand, Vietnam, etc.). In the meantime, the vast majority of goods imported and exported give each other preferential policies for zero-tariff treatment. This preferential policy of zero-tariff treatment between each other has been implemented since January 1, 2011.
With the deepening of the China-ASEAN Free Trade Area strategy, China's export products can enjoy the preferential tariff policy of the free trade zone in the ten member countries of ASEAN with the preferential certificate of origin of the China-ASEAN Free Trade Area.
Since December 31, 2014, China has exported rubber tires under Laos HS4011.10, 4011.20, and 4019.94 (usually referred to as semi-steel radial tires, all-steel radial tires and engineering tires), and January 1, 2015. Since then, China's exports to Cambodia under HS4011.10, 4019.94 rubber tires fell to zero tariff.
This is after the import of zero tariffs on rubber tires under Singapore, Brunei HS4011.10, 4011.20, and 4019.94, and two other zero-tariff ASEAN member countries.
At this point, the rubber tires under HS4011.94, except Indonesia's 15% CIF tariffs without concessions, Vietnam's 5% CIF tariffs, the remaining ASEAN countries' import tariffs have all dropped to zero.
Due to the lack of understanding of the preferential tariff policy of the free trade zone and the restrictions of the implicit trade measures of the ASEAN countries, in 2014, Dongying City of Shandong Province accounted for the largest proportion of rubber tires for ASEAN exports (accounting for 34.69%). In 2014, the value of exports to ASEAN was 173.393 million US dollars, the visa amount of ASEAN certificate of origin was 103.0955 million US dollars, and the visa ratio was only 5.95%. The use of preferential tariff policies in the free trade zone has problems such as uneven level and overall low.
Therefore, Dongying Inspection and Quarantine Bureau reminds all tire exporting enterprises to make good use of various preferential policies of origin including China-ASEAN Free Trade Area to continuously enhance their competitive advantages.

We've involved in there field for many years, so we have rich experience. About Industrial Components, there are Auto PartsAgriculture PartsMedical Equipment Parts, Pump&valve parts, Hydraulic components, Electronics parts, fastener, Pipe Fittings. Here comes the specific information about these parts. Pls see to below introduction:

First see below related our photos of these parts:

5 Industrial components

Detail information about these parts:

Many kinds of auto parts, car brand is now more and more, more and more types of vehicles. Commercial vehicles and passenger cars can be divided into two types, which refers to a passenger vehicle less than nine seats to sit (including the driver bits), with the primary purpose passenger vehicles. Specifically, the passenger car that is divided into the basic passenger car, MPV car, SUV and other vehicles such as pickups and other vehicles.

Agricultural products include, amongst others, tractors, combine harvesters, cotton harvesters, balers, planters/seeders, silage machines, and sprayers, as well as different parts. Combine Parts, Engine & Drivetrain, Filters and Filter Paks, Hay and Forage Parts, Planting and Seeding Parts, Reman parts, Sprayer parts, truck parts, tractors parts, etc

Medical equipment and continuously improve the basic conditions for medical science and technology level is an important indicator of the degree of modernization, medical equipment has become an important field of modern medicine. Development depends largely on the development of medical equipment, and even in the development of the medical industry, which break through the bottleneck also played a decisive role.

Hydraulics is a topic in applied science and engineering dealing with the mechanical properties of liquids or fluids. At a very basic level, hydraulics is the liquid version of pneumatics. Fluid mechanics provides the theoretical foundation for hydraulics, which focuses on the engineering uses of fluid properties. In fluid power, hydraulics are used for the generation, control, and transmission of power by the use of pressurized liquids. Hydraulic topics range through some part of science and most of engineering modules, and cover concepts such as pipe flow, dam design, fluidics and fluid control circuitry, pumps, turbines, hydropower, computational fluid dynamics, flow measurement, river channel behaviour and erosion.

As an international partner with international top contractors, besides comprehensive service of dredging, land reclamation, offshore projects, marine engineering, municipal engineering and environmental remediation projects, based on above experience with strong financial condition, UniSite group also developed the machining equipment and production capability and is able to provide the Hydraulics components.

Aerospace is not the same as airspace, which is the physical air space directly above a location on the ground. The beginning of space and the ending of the air is considered as 100 km above the ground according to the physical explanation that the air pressure is too low and recognized by authorities

Fasteners can also be used to close a container such as a bag, a box, or an envelope; or they may involve keeping together the sides of an opening of flexible material, attaching a lid to a container, etc. There are also special-purpose closing devices, e.g. a bread clip. Fasteners used in these manners are often temporary, in that they may be fastened and unfastened repeatedly.

A fitting is used in pipe systems to connect straight pipe or tubing sections, adapt to different sizes or shapes and for other purposes, such as regulating {or measuring) fluid flow. "Plumbing" is generally used to describe the conveyance of water, gas, or liquid waste in domestic or commercial environments; "piping" is often used to describe the high-performance (high-pressure, high-flow, high-temperature or hazardous-material) conveyance of fluids in specialized applications. "Tubing" is sometimes used for lighter-weight piping, especially those flexible enough to be supplied in coiled form.

Industrial Components

Industrial Components ,industrial equipment Parts,Agriculture Parts,Electronic Components

Shinvast Industry Ltd , http://www.shinvastindustry.com