PCT high pressure accelerated aging test chamber maintenance

PCT high pressure accelerated aging test box is also called PCT high temperature high pressure and high humidity life aging test box (accelerated aging test box). Because the value of PCT high pressure accelerated aging test box is generally higher, we recommend putting it in a relatively good temperature environment. Our experience temperature is 8-23°C. For laboratories that do not have this condition, they must be equipped with an appropriate air conditioner (air-cooled) or cooling tower (water-cooled).

PCT high-pressure accelerated aging test chamber should adhere to professional management of qualified personnel. The qualified units should send special personnel to the supplier manufacturers for training and learning regularly to obtain professional maintenance and repair capabilities.

PCT accelerated life test chamber maintenance:

1. After each use or when there is a test item overflow, use a neutral cleaning product and a soft cloth to clean the inner box.

2. The appearance of the PCT can be cleaned with neutral cleaning products to keep the PCT tidy.

3. Before each use, check whether the door gasket is clean, if there is any foreign material obstruction, and regularly use the silicone oil to maintain the service life of the door gasket.

PCT High Pressure Accelerated Weathering Tester Parts Replacement:

1. Regularly inspect the pipes and fittings. If any leak or damage is found, repair or replace them immediately.

2. Periodically clean the solenoid valve. If you find that the solenoid valve is not working properly, there is an abnormal sound, or the parts are damaged, replace the solenoid valve immediately.

3, door gasket aging, deformation or damage, please replace immediately, the replacement method is very simple, as long as the use of flat head screwdriver or other Tools to remove the old door gasket, and then the new door gasket leveling the door mat groove on the cover plate You can.

For more information on PCT high pressure accelerated aging test chamber maintenance, contact Dongguan Teddy Test Equipment Co., Ltd.

Kage's Quick Release Fittings are a market break through. These light weight fittings are made from billet high grade Aluminium. They are double anodized to safe guard your fittings against corrosion. They have been tested and are a perfect choice for brake, clutch, and fuel lines connecting by hands in second. These fittings are designed for leak free release. Please refer application guide. And Kage's quick release fittings are also available with a heavy duty Titanium body.

Quick Release Fittings

Quick Release Fittings,Quick Release Air Fittings,Quick Release Fittings

Kage Hardware Product Co., Ltd , http://www.kage-autofittings.com