The project of annual production of 100,000 tons of 1,4-butanediol and its downstream products by Shaanxi Vidio Chemical Co., Ltd. is under construction. The total investment of the project is 2.630 billion yuan, including an annual output of 100,000 tons of 1,4-butane. Alcohol, 240,000 tons of formaldehyde, 40,000 tons of acetylene, 46,000 tons of polytetrahydrofuran and 10,000 tons of γ-butyrolactone production equipment and its supporting projects, among which new products of polytetrahydrofuran and γ-butyrolactone fill the northwest blank. After the project is completed and put into production, it is expected to realize an annual sales income of 1.94 billion yuan and a profit of 260 million yuan.
What is plasma cutting?
EDAWELD CO.,LTD
Plasma cutting uses a plasma torch to cut metals of various thicknesses. The plasma cutter blows compressed air out of a nozzle at high speed and at the same time forms an electrical arc between the nozzle and the metal to be cut. The resulting plasma is hot enough to melt the metal and the speed ensures that the molten metal is blown away from the cut.
What is plasma?
To properly explain how a plasma cutter works, we must begin by answering the basic question [What is plasma? In its simplest terms, plasma is the fourth state of matter. We commonly think of matter having three states: a solid, a liquid, and a gas. Matter changes from one state to the other through the introduction of energy, such as heat. For example, water will change from a solid (ice) to its liquid state when a certain amount of heat is applied. If the heat levels are increased, it will change again from a liquid to a gas (steam). Now, if the heat levels increase again, the gases that make up the steam will become ionized and electrically conductive, becoming plasma. A plasma cutter will use this electrically conductive gas to transfer energy from a power supply to any conductive material, resulting in a cleaner, faster cutting process than with oxyfuel.
The plasma arc formation begins when a gas such as oxygen, nitrogen, argon, or even shop air is forced through a small nozzle orifice inside the torch. An electric arc generated from the external power supply is then introduced to this high pressured gas flow, resulting in what is commonly referred to as a [plasma jet". The plasma jet immediately reaches temperatures up to 40,000° F, quickly piercing through the work piece and blowing away the molten material.
Plasma system components
Power supply -- The plasma power supply converts single or three phase AC line voltage into a smooth, constant DC voltage ranging from 200 to 400VDC. This DC voltage is responsible for maintaining the plasma arc throughout the cut. It also regulates the current output required based on the material type and thickness being processed.
Arc Starting Console – The ASC circuit produces an AC voltage of approximately 5,000 VAC at 2 MHz which produces the spark inside of the plasma torch to create the plasma arc.
Plasma torch – The function of the plasma torch is to provide proper alignment and cooling of the consumables. The main consumable parts required for plasma arc generation are the electrode, swirl ring, and nozzle. An additional shielding cap may be used to further improve cut quality, and all the parts are held together by inner and outer retaining caps.
Plasma Cutter,Plasma Cutting Machine,MMA Plasma Cutting Machine,Industrial Plasma Cutting Machine
Changzhou Edaweld Trading Company Limited , https://www.edaweld.com