A: Explosion-proof lighting classification 1. Explosion-proof lighting explosion-proof categories, levels and temperature groups see national standards.
2. According to the explosion-proof type, it can be divided into 5 types: flameproof, increased safety, positive pressure, non-sparking and dust explosion-proof. It can also be combined by other explosion-proof types and the above-mentioned various explosion-proof types or composite type and special type. .
3. According to the type of protection against electric shock can be divided into I, II, III category. The protection against electric shock is to prevent the explosion-proof lamp housing from being easily touched and the parts are electrified, so that the human body is exposed to electric shock or conductors with different potentials to generate electric sparks and ignite the explosive mixture. AI class—On the basis of basic insulation, accessible conductive parts that are not energized during normal operation are connected to the protective ground conductor in the fixed line. Class BII - Use double insulation or reinforced insulation as a safety measure without grounding protection. Class CIII - Use a safe voltage with an effective value of not more than 50V, and no voltage above it will be generated. Category D0 - only rely on basic insulation as a safety protection measure. Most of the explosion-proof lamps and lanterns are protected against electric shock and they are Class I and only a few are Type II and Type III lamps. For example: all plastic explosion-proof lamps, explosion-proof flashlight Jane.
4. Classified according to the protection class of the enclosure: In order to protect the dust, solid foreign matter and water from entering the lamp cavity and touching or accumulating on the live parts to cause flashover, short circuit or damage to the electrical insulation, etc., there are a variety of enclosure protection methods to protect the electrical Insulation effect. The characteristic letter "IP" followed by two digits is used to characterize its enclosure protection level. The first number indicates the protection against humans, solid objects or dust. Divided into 0-6 levels. Explosion-proof lamps are sealed lamps. Their dust-proof capacity is at least 4 levels. The second number indicates the protection against water and is classified into 0-8.
5. According to the lighting design of the support surface material classification: Indoor explosion-proof lighting may be installed on many common surfaces of combustible materials, such as wooden walls and ceilings, which do not allow explosion-proof lighting installation surface temperature exceeds the safety value. According to whether explosion-proof lamps can be installed directly on the surface of ordinary combustible materials, they can be classified into two categories. One category is lamps that are only suitable for installation on non-flammable surfaces. The other category is lamps that are suitable for direct installation on the surface of ordinary combustible materials and are marked with symbols.
6. According to the installation and use of the form can be divided into fixed, portable, removable.
Two: Zhejiang Zhuo'an LED explosion-proof advantages 1, the highest explosion-proof explosion-proof grade, can be used in a variety of flammable and explosive places safe use;
3, transparent parts are optimized design and processing, soft light, uniform illumination, no ghosting, effective to avoid eye discomfort and fatigue;
2, light sources, electrical appliances are all used in Germany brand, power factor is greater than 0.9, longer life, more stable performance, good light transmission, the same power brightness increased by 10% -20%, eliminating the hassle and inconvenience of frequent replacement of light bulbs;
4, the shell is made of light alloy material and after electrostatic spraying treatment, wear resistance, corrosion, waterproof and dustproof, can be used in harsh environments;
5, exquisite structural design, good heat dissipation, effectively reduce the lamp body temperature, improve the lamp life;
6, light weight, small size, beautiful, easy to operate. Fixed explosion-proof lamps III: The main technical parameters of the explosion-proof signs ExdeIICT6/T4 introduction of the cable φ8mm ~ φ14mmDIPA20TA, T6/T4 rated voltage AC220V50Hz distance ratio 2.5 protection class IP56 lamp body dimensions φ200 × 315mm insulation class I power box dimensions 310×237 × 85mm anti-corrosion grade WF2 total weight (Kg) 10 Note: 70W explosion-proof mark: ExdeIICT6; 100W, 150W explosion-proof mark: ExdeIICT4;
2. According to the explosion-proof type, it can be divided into 5 types: flameproof, increased safety, positive pressure, non-sparking and dust explosion-proof. It can also be combined by other explosion-proof types and the above-mentioned various explosion-proof types or composite type and special type. .
3. According to the type of protection against electric shock can be divided into I, II, III category. The protection against electric shock is to prevent the explosion-proof lamp housing from being easily touched and the parts are electrified, so that the human body is exposed to electric shock or conductors with different potentials to generate electric sparks and ignite the explosive mixture. AI class—On the basis of basic insulation, accessible conductive parts that are not energized during normal operation are connected to the protective ground conductor in the fixed line. Class BII - Use double insulation or reinforced insulation as a safety measure without grounding protection. Class CIII - Use a safe voltage with an effective value of not more than 50V, and no voltage above it will be generated. Category D0 - only rely on basic insulation as a safety protection measure. Most of the explosion-proof lamps and lanterns are protected against electric shock and they are Class I and only a few are Type II and Type III lamps. For example: all plastic explosion-proof lamps, explosion-proof flashlight Jane.
4. Classified according to the protection class of the enclosure: In order to protect the dust, solid foreign matter and water from entering the lamp cavity and touching or accumulating on the live parts to cause flashover, short circuit or damage to the electrical insulation, etc., there are a variety of enclosure protection methods to protect the electrical Insulation effect. The characteristic letter "IP" followed by two digits is used to characterize its enclosure protection level. The first number indicates the protection against humans, solid objects or dust. Divided into 0-6 levels. Explosion-proof lamps are sealed lamps. Their dust-proof capacity is at least 4 levels. The second number indicates the protection against water and is classified into 0-8.
5. According to the lighting design of the support surface material classification: Indoor explosion-proof lighting may be installed on many common surfaces of combustible materials, such as wooden walls and ceilings, which do not allow explosion-proof lighting installation surface temperature exceeds the safety value. According to whether explosion-proof lamps can be installed directly on the surface of ordinary combustible materials, they can be classified into two categories. One category is lamps that are only suitable for installation on non-flammable surfaces. The other category is lamps that are suitable for direct installation on the surface of ordinary combustible materials and are marked with symbols.
6. According to the installation and use of the form can be divided into fixed, portable, removable.
Two: Zhejiang Zhuo'an LED explosion-proof advantages 1, the highest explosion-proof explosion-proof grade, can be used in a variety of flammable and explosive places safe use;
3, transparent parts are optimized design and processing, soft light, uniform illumination, no ghosting, effective to avoid eye discomfort and fatigue;
2, light sources, electrical appliances are all used in Germany brand, power factor is greater than 0.9, longer life, more stable performance, good light transmission, the same power brightness increased by 10% -20%, eliminating the hassle and inconvenience of frequent replacement of light bulbs;
4, the shell is made of light alloy material and after electrostatic spraying treatment, wear resistance, corrosion, waterproof and dustproof, can be used in harsh environments;
5, exquisite structural design, good heat dissipation, effectively reduce the lamp body temperature, improve the lamp life;
6, light weight, small size, beautiful, easy to operate. Fixed explosion-proof lamps III: The main technical parameters of the explosion-proof signs ExdeIICT6/T4 introduction of the cable φ8mm ~ φ14mmDIPA20TA, T6/T4 rated voltage AC220V50Hz distance ratio 2.5 protection class IP56 lamp body dimensions φ200 × 315mm insulation class I power box dimensions 310×237 × 85mm anti-corrosion grade WF2 total weight (Kg) 10 Note: 70W explosion-proof mark: ExdeIICT6; 100W, 150W explosion-proof mark: ExdeIICT4;
Household Sanitary Ware DFC system
Wood safety box Integrated stove Smart toilet lid TV stand are common household items. Their grinding processing at present are manual, the force imposing on the Grinder is not consistent, most are based on technician experience or technique. Our Force Control System can flexible control the force imposing on the grinder, quick response to the surface changing, and instant adjusting the force on the grinder.
wood DFC system, safety box DFC system,Integrated stove DFC system,Smart toilet lid DFC system,TV stand DFC system
DARU Technology (Suzhou) Co., Ltd. , https://www.yiwufizz.com